PDA

View Full Version : Help


tucamote
04-20-2009, 05:51 PM
Anyone know what belt I need for a 2.5 upper and a 4 lower?
Chris94L
04-20-2009, 05:56 PM
One about that long.
RSVT
04-20-2009, 06:03 PM
if you order one from JLP they will get the size you need, order by phone
tucamote
04-20-2009, 07:22 PM
Thats the problem I got it from a member on svt forum.
ZeusSVT
04-20-2009, 09:52 PM
My guess would be a 68" but where did you manage to get a 2.5 upper anyways. Never heard of it.
TXLIGHTNING
04-20-2009, 10:41 PM
My guess would be a 68" but where did you manage to get a 2.5 upper anyways. Never heard of it. They make them for the KB 2.3L. Start with a 68" like listed above, and work your way from there.
my2002lightning
04-20-2009, 10:55 PM
That narrows it down.:D


One about that long.
L8 APEX
04-20-2009, 10:58 PM
For a KB I assume, about a K080675 if I remember correctly. I have a couple in Gatorback.
nacklas
04-20-2009, 11:47 PM
One about that long.


:rll::rll:
tucamote
04-21-2009, 07:02 PM
Well I got the pully in and went to put it on and it does not fit it hits the snout on the supercharger when tight. I must of gotten the wrong one?
L8 APEX
04-21-2009, 11:40 PM
What does it look like? Did the bushing get stuck on the other pulley?
tucamote
04-22-2009, 03:58 AM
no the only thing that came off was the old pully and the bolt that holds it in place.
TXLIGHTNING
04-22-2009, 10:25 AM
I thought I had seen other people having to grind the snout of the SC down to make a 2.5" pulley fit..?
tiffo60
04-22-2009, 10:34 AM
I thought I had seen other people having to grind the snout of the SC down to make a 2.5" pulley fit..?

sounds right I say Do it:d
TXLIGHTNING
04-22-2009, 11:42 AM
There is the link Terry posted way back. It shows a KB 2.3 with a 2.5" upper. It looks like the snout has been modified. http://www.talonclub.com/forum/showthread.php?t=11456&highlight=peep+pulley
L8 APEX
04-22-2009, 04:29 PM
If it is a KB pulley it should fit without any grinding.
tucamote
04-22-2009, 04:59 PM
Hmm thats weird because mine didnt fit and its a KB pully alright. I had one of our machinist take a little off the inned diameter and see if it will fit. But now i cant take off the pully first time it came off easy didnt need the tool.
tucamote
04-22-2009, 06:41 PM
Well guys I ended up going a different route. I was talking to Lenard AKA ssthis about my problem. He told me he still had his lower 8lb pully and that I could have it. So I will get it from pat on thurs and put it on and then get it tuned. Hope I see good numbers with that.
tiffo60
04-23-2009, 07:49 AM
Well guys I ended up going a different route. I was talking to Lenard AKA ssthis about my problem. He told me he still had his lower 8lb pully and that I could have it. So I will get it from pat on thurs and put it on and then get it tuned. Hope I see good numbers with that.

That will be better for ya any how, the belt slip would have been pretty bad on a 2.5 upper:tu: