charlie
07-17-2009, 11:10 AM
My Converter lock up had been kicking in and out going down the HWY for some reason.
I checked everything related and found no issues, or any codes.
I plugged my Actron scanner in on the drive to work, and I noticed the TP sensor was not reading right all the time. It would jump by several #'s in certain spots. So I figured I'll just go ahead and replace it.
Needless to say, My lock up has not acted up since.
After looking up certain parts of the program, I realized the computer thought I was accelerating fairly fast, when the voltage from the tps changed rapidly, it was dropping out the lock up. :eek:
Very cool cheap trans. fix!
I checked everything related and found no issues, or any codes.
I plugged my Actron scanner in on the drive to work, and I noticed the TP sensor was not reading right all the time. It would jump by several #'s in certain spots. So I figured I'll just go ahead and replace it.
Needless to say, My lock up has not acted up since.
After looking up certain parts of the program, I realized the computer thought I was accelerating fairly fast, when the voltage from the tps changed rapidly, it was dropping out the lock up. :eek:
Very cool cheap trans. fix!