View Full Version : July Monthly Meeting @ Humps - 7/6/06 - Who's Going?
tliss
07-05-2006, 12:26 PM
Post up...
Moonshine
07-05-2006, 02:03 PM
I will, if I'm not the Lone Ranger. :o
Silver_2000
07-05-2006, 02:07 PM
Im planning on it
98Cobra
07-05-2006, 02:12 PM
I'll be there...
Beaudee
07-05-2006, 03:27 PM
Ill be there:beer:
PoorSvtman
07-05-2006, 03:47 PM
ill try and make it...:beer:
Silver_2000
07-05-2006, 07:28 PM
I'll be there...
Ill bring LT Blender... LOL :hammer::rll::hammer:
Moonshine
07-05-2006, 07:28 PM
Im planning on it
I'll bring your modems. :tu:
Mark #2
07-05-2006, 07:47 PM
Im planning on it
I am 50%, acting for 2 of my bosses, on a telecom with Taiwan now, might have to do the same tomorrow.
I won't bring the scanner though haven't replaced the O2s yet, reset every week.;)
gbgary
07-05-2006, 08:19 PM
i'll probably make it but i may be a little late depending on how the day goes.
PoorSvtman
07-05-2006, 08:58 PM
just remembered my mufflers should be in tomorow.. ill probly try and go get them on then head out..
98Cobra
07-05-2006, 10:04 PM
Ill bring LT Blender... LOL :hammer::rll::hammer:
I think I have completed my tour of duty with LT Blender. I wish him well in parachuting into a hot zone with delicious frozen refreshments for OTHER troops. :D
tiffo60
07-05-2006, 10:10 PM
mike if you go ill follow you out there, i work on hulen so im close to you and i have no idea where humps is
where is that located @? this my first meeting if i find it
PoorSvtman
07-05-2006, 10:35 PM
mike if you go ill follow you out there, i work on hulen so im close to you and i have no idea where humps is
Sounds good.. I get off at 330. if my mufflers are on my door step im going to shoot over to my muffler guy and get them suckers welded in...
PoorSvtman
07-05-2006, 10:37 PM
where is that located @? this my first meeting if i find it
where abouts in ft worth are you? all else fails you can meet up with tiffton and myself...
Beaudee
07-05-2006, 10:45 PM
just remembered my mufflers should be in tomorow.. ill probly try and go get them on then head out..
Mike, i need to get access to a wiring diagram, for the Honda CRX.I need to locate the fuel pump wire and the one going to the starter solinoid.I probally can find em but any help would be appreciated.I dont have any problems with the car just some security issues.:tu:
PoorSvtman
07-05-2006, 10:48 PM
ill see if i can dig out my honda service stuff..
Beaudee
07-05-2006, 10:50 PM
ill see if i can dig out my honda service stuff..Thanks:beer:
i live north ft worth by saginaw thats by 820 and 1-35
PoorSvtman
07-05-2006, 11:35 PM
i live north ft worth by saginaw thats by 820 and 1-35
cool.. if you go and i get my mufflers installed and go you can meet up with tiffton and i... im over in the kennedale/ arlington area....
give me a buzz tomorow afternoon if you want.. 817-939-5924
sounds good man check you later
my2002lightning
07-06-2006, 01:55 AM
I would if I could. :mad: Too many deadlines down here and not enough hours in the day.:cool:
Ronald
tliss
07-06-2006, 12:21 PM
Looks like 8 ish at this point. I'm not going to do a reservation since that is not a giant group. First one there set up a table.
I won't be coming this round since the baby will be here next Wednesday and I've got a ton of loose ends to tie off before her arrival. Have one for me! :beer:
Tom
wesman
07-06-2006, 04:19 PM
So what time are folks gonna show up ?
--wes
tiffo60
07-06-2006, 04:22 PM
im going to be there around 5:30ish
StormShadow
07-06-2006, 04:46 PM
Can't make this one. I just got back into town and have some errands to run before I go back to work tomorrow.
wesman
07-06-2006, 08:37 PM
Good turnout, good to see all the familiar faces and meet some new ones.
--wes
tliss
07-06-2006, 08:48 PM
Good turnout, good to see all the familiar faces and meet some new ones.
--wes
Glad it turned out OK. Glad I stayed home to take care of things...wife got pretty sick tonight. She's better now, but she revisited dinner pretty fiercely earlier. From the look of it there is little room in there and anything that doesn't fit comes back. Glad we'll be seeing the baby come next week.
Tom
gbgary
07-06-2006, 09:01 PM
i didn't leave the office until 6:30...dang it. maybe next month. how about blowing-off firewater the rest of the way?
PoorSvtman
07-06-2006, 09:08 PM
glad i made it out... it was a rush after work to get the mufflers installed, then go home and shower and tifton and I booked it from my house to the meeting.. Good times as always:beer:
Mark #2
07-06-2006, 10:09 PM
Yup good times, good conversation,
and that is the fastest I have driven on 35 and 635 after the meeting with something blue.;)
L8 APEX
07-06-2006, 10:29 PM
Thanks for the ride and reminder call Moonshine! Maybe it was carma that I was able to fix your fuel spill;) . It was great to see the crew though I think TP slipped out early.. It is nice to have three original members who have been lightning less for years still coming to the meetings:tu: . Mark I hope you owned to blue step child!:D I had two large cold Rita's and that always makes things better:beer: :beer: .
i couldnt make it this time cuz i got out 9 pm. wheres next months at maybe i can make it to that one
Silver_2000
07-06-2006, 11:59 PM
i couldnt make it this time cuz i got out 9 pm. wheres next months at maybe i can make it to that one
http://www.talonclub.com/forum/calendar.php
http://www.talonclub.com/forum/calendar.php?do=getinfo&e=98&day=2006-8-3&c=1
Firewater
10261 Technology Boulevard East - Across from the AMC Grand
Dallas, TX 75220
(214) 352-5700
98Cobra
07-07-2006, 12:36 AM
I gotta learn how many gears to shift down when I want to run on a highway. I have driven a Lightning, and gotten lazy, for too many years - when I only step down from 6th to 4th its embarassing! :D
L8 APEX
07-07-2006, 12:46 AM
Depending on gearing I usually do 2nd below 65 and 3rd below 90.:burnout:
Moonshine
07-07-2006, 08:44 AM
Good meeting, and nice to see some of the plankholders I haven't seen in awhile.
Garrett, 4th? :nono:
T, thanks for spotting my filter blow out, and keeping me from burning up the beast. That's one headache I can do without.
vBulletin, Copyright ©2000-2024, Jelsoft Enterprises Ltd.