alignment kits

[RSVT]

i found this alignment kit on summit racing, does anyone or has anyone purchase/install this kit before, and does it get the job done right? the cost on it is about $45 or is there any other suggestions

[SVTJoseCuervo]

sent you pM with a link

[T Hogg]

sent you pM with a link

Jose,
Can you sned me that link too?

Thanks

[RSVT]

jose, have you installed it yet?

[SVTJoseCuervo]

jose, have you installed it yet?


Nah.
Im still waiting for the hangers...but my friend at NTB will do it for me once I take it up there for the alignment.

[RSVT]

i dont want to sound like a dumb a$$ but whats NTB? and where is it @ so i can take mine up there also? that kit doesnt look like the one on summit racing, and also mines are in the -2's thats only for -1's

[SVTJoseCuervo]

National tire basics? lol idk...Tire place just like discount tire.

My gfs bro works there..and a good friend from hs is the manager...

I will shoot u a pm later..g2g

[Tex Arcana]

i found this alignment kit on summit racing, does anyone or has anyone purchase/install this kit before, and does it get the job done right? the cost on it is about $45 or is there any other suggestions

Roy, post a link to it, pls.

[L8 APEX]

National Tire and Battery farkstick!:D I buy the cam bolt kits from Orielys they are about 55 bucks.

[RSVT]

Roy, post a link to it, pls.

Tex, go to summitracing.com and put this in as the part# EIB-5-87385K, it is Eibach alignment kit its for $39.95, thats a cheap price i want to know if it gets the job done right bcuz mine is in the -2s, and it says this kit is for -2s, so check it out

[99WhiteBeast]

You can get it professionally done for a little more than that price. See Mike at Champion Spring (Henderson and 30)

[L-Fever]

You can get it professionally done for a little more than that price. See Mike at Champion Spring (Henderson and 30)

+1 :tu:

[Tex Arcana]

Tex, go to summitracing.com and put this in as the part# EIB-5-87385K, it is Eibach alignment kit its for $39.95, thats a cheap price i want to know if it gets the job done right bcuz mine is in the -2s, and it says this kit is for -2s, so check it out


National Tire and Battery farkstick!:D I buy the cam bolt kits from Orielys they are about 55 bucks.

So are the Ford units not able to make the adjustment?? I know they're more expensive, but I've heard of some people breaking the NAPA/offbrand cheapies; or do the Eibach/o'Reilly's kits have more adjustment range? I know I don't need it atm, my alignment came in just fine with the Ford units (which, lo and behold, were already in there, so I didn't need the ones I had gotten :hammer:).

[RSVT]

Ford dealership was gnna charge me $80 for the alignment but i didnt tell them i had aftermarket springs

[Tex Arcana]

Ford dealership was gnna charge me $80 for the alignment but i didnt tell them i had aftermarket springs

I dropped about $120 on mine, but the tech let me walk back with him and watch the job get done, and ask questions and such. :cool:

[L-Fever]

I dropped about $120 on mine, but the tech let me walk back with him and watch the job get done, and ask questions and such. :cool:

We installed the ford cam bolts on mine:

F65Z-3B236-BB – Upper Control Arm Bolt (4 req.)
F65Z-3C178-AA - Upper Control Arm Cam (4 req.)

and Champion Spring dialed it in!

[SVTJoseCuervo]

[quote=L8 APEX;119556]National Tire and Battery quote]

:tu:

[wesman]

We installed the ford cam bolts on mine:

F65Z-3B236-BB – Upper Control Arm Bolt (4 req.)
F65Z-3C178-AA - Upper Control Arm Cam (4 req.)

and Champion Spring dialed it in!



BTW- If anyone needs a set of Ford cam bolts I think I have a new set in the bags.

I'll look and see exactly what I have if anyone is interested.


--wes

[BC Lightning]

Paid roughly $150.00 for 5 years unlimited alignments at NTB

[SVTJoseCuervo]

Paid roughly $150.00 for 5 years unlimited alignments at NTB

:eek2:

I did get a free one up there with my friend tho lol..might give him 20-30 bucks next time.

[RSVT]

You can get it professionally done for a little more than that price. See Mike at Champion Spring (Henderson and 30)

so if i get this summit racing kit, just go up here to install it, or i dont need this kit inorder for them to align it:confused:

[Lyfisin]

but the tech let me walk back with him and watch the job get done, and ask questions and such. :cool:

Otherwise, it would have been $60.00. :tongue:

[Tex Arcana]

Otherwise, it would have been $60.00. :tongue:

Possibly, but that's cool. :)

[wesman]

BTW- If anyone needs a set of Ford cam bolts I think I have a new set in the bags.

I'll look and see exactly what I have if anyone is interested.


--wes

found them today...I have 4 bolts and the 4 washers if anyone needs them let me know.

--wes