PDA

View Full Version : EGR Cap size for exhaust


GoldLS1
03-07-2007, 11:25 PM
Someone refresh my memory of what size is correct??
L8 APEX
03-07-2007, 11:32 PM
It is water hose fttg size 5/8 or 3/4? It is a male hose thread whatever that is.
GoldLS1
03-07-2007, 11:51 PM
Likea garden hose?? Thats a 3/4 I believe... As always preciate it Terry.
Bird
03-07-2007, 11:59 PM
NAPA EGR cap # C5129X12 - has the right threads and taper.

Bird
L-Fever
03-08-2007, 02:06 PM
In a pinch, you can cut one of the stock egr tube nuts from the egr tube and take a quarter and some high temp silicone. Instant cap! Costs uh, about $.25 cents.
PoorSvtman
03-08-2007, 07:07 PM
In a pinch, you can cut one of the stock egr tube nuts from the egr tube and take a quarter and some high temp silicone. Instant cap! Costs uh, about $.25 cents.



dont even need high temp silicone... have had mine like that since the built motor lol....
L8 APEX
03-09-2007, 12:55 AM
Or cut and weld shut the stock EGR tube at the nut.
TXLIGHTNING
04-10-2007, 03:23 PM
I'm about to tackle this project and was looking for some pointers on getting the egr pipe unscrewed from the manifold. It looks like a PITA to reach. :beer:
tiffo60
04-10-2007, 03:27 PM
I'm about to tackle this project and was looking for some pointers on getting the egr pipe unscrewed from the manifold. It looks like a PITA to reach. :beer:
it is, you have to go thru the fender well
charlie
04-11-2007, 09:47 PM
Do you have to turn the egr off in the comp for the egr delete? Or will it just not through a code?


Charlie
Chris94L
04-11-2007, 09:57 PM
I burned out a penny doin the same thing on my 4 cyl mustang w/ ranger header. made one hell of a racket when it went
BC Lightning
04-12-2007, 12:15 AM
Do you have to turn the egr off in the comp for the egr delete? Or will it just not through a code?


Charlie

Yes