Anyone interseted in a dyno day for Sat 24th?

[tiffo60]

My buddy Ryder is wanting to dyno the Lightning he just bought from Gary and Im wanting to put mine back on and see what its doing right now so I thought I would inquire and see if anyone else would be interested in making a couple of pulls on the dyno (sat 24th). The dyno is located in Saginaw, just a little ways off of 820 in fort worth

He also has all kinds of race fuel on tap!!

$30
3-24-07@ 9:30am
its at 4551 Bailey Boswell Rd
Fort Worth, Texas
76179

those in so far

1.Tifton
2.Ryder
3.Ronnie
4.Dennis
5.Doug
6.Jose
7.Roy +3
8.Wayne
9.John
10.Jimmy(maybe)
11.Steveo
12.Jeff
13.Zac
14.Larry
15.Mark
16.Blake
17.Gary(canceled)
18.Tyson
19. Terry
20. Lenard
21.Kyle
22.Micheal (maybe)
23.Weston(maybe)
24.Casey
25.Tony(longview)

[projlightning]

Where about is it located so I can take my 93L after I get it up and running again.

[Sixpipes]

I need to get some new numbers and Ronny wants to check his again. What time are we talking about? :cool:

[tiffo60]

i changed the date, just talked to the guy and hes in houston so its setup up for next saturday the 24th at 2pm

[Sixpipes]

i changed the date, just talked to the guy and hes in houston so its setup up for next saturday the 24th at 2pm

That might work better for me anyway. I'm planning on it and Ronny will probably bring his Gen I also. :cool:

[tiffo60]

as i long as i bring 5 or more trucks he only charges 30 bucks for 3 pulls

[Silver_2000]

Keep this coming to the top - Id like to see what my lowly stock blowered 2004 will do ...

[SVTJoseCuervo]

Mine is stock but I would like to see what numbers come out...count me in...Im free on saturdays :tu:

[RSVT]

as i long as i bring 5 or more trucks he only charges 30 bucks for 3 pulls

:nana2 count me in Tif, i was gonna ask you about that place, and how much they charged for pulls, next saturday sounds good:tu:. i just my other buddies w/ L's about this and they also want to attend this dyno session, i know im going, and if i take them it will probably be about 3-4 of us heading out there

[LocoLightning02]

Im in. I would love to see what kinda numbers Im putting down. Ill bring a buddy to.:nana2

[David N]

I'm IN...Would like to see what the GT-500 puts out stock...:d

[slick-svt]

God willin and the creeks don't rise I'll do a few pulls, only have a few things done but what the hell:cool:

[Ohmsby]

I'm in I need to see what the Gen 2 will pull

[99WhiteBeast]

I'll make a guest appearance just to watch

[Sixpipes]

My buddy Ryder is wanting to dyno the Lightning he just bought from Gary and Im wanting to put mine back on and see what its doing right now so I thought I would inquire and see if anyone else would be interested in making a couple of pulls on the dyno (sat 24th). The dyno is located in Saginaw, just a little ways off of 820 in fort worth

3-24-07@ 2:00pm
its at 4551 Bailey Boswell Rd
Fort Worth, Texas
76179

Looks like your buddy is going to be busy...http://www.corral.net/forums/images/smilies/eplus2.gif

[tiffo60]

Looks like your buddy is going to be busy...http://www.corral.net/forums/images/smilies/eplus2.gif

we may have to start earlier that day just to fit everyone in, this is going to be funknana

[5W0P3]

Mine is stock but I would like to see what numbers come out...count me in...Im free on saturdays :tu:

That makes 2 of us. I'll be there with paper tags still! lol (i think)

Whats the count at?

[tiffo60]

That makes 2 of us. I'll be there with paper tags still! lol (i think)

Whats the count at?

looks to be about 15 plus a couple of random Ls1 trucks that might be coming:banana: so theres going to be a pretty good turn out, im going to talk with the guy tommorow and schedule it alittle earlier so he can get us all in, maybe start around 10am or so?

[5W0P3]

Awesome! sounds good to me!

[slick-svt]

Hey Tif is this a shop or is this just some one who has a portable dyno set up. Be cool if someone had a new dyno location there, wouldn't have to drive very far.

[tiffo60]

Hey Tif is this a shop or is this just some one who has a portable dyno set up. Be cool if someone had a new dyno location there, wouldn't have to drive very far.

its a supra shop, nice guy that owns it and he has an in-ground dynojet

[GoldLS1]

Hummmm... I in.

[tiffo60]

I updated the time to 9:30am, since we have so many coming this will make it easy for everyone to get there pulls done while the air is still cool

[slick-svt]

Well thats a plus!! dyno right in the area knana

[SVTJoseCuervo]

That makes 2 of us. I'll be there with paper tags still! lol (i think)

Whats the count at?

Mine still has Kentucky plates :o

the truck is in my dads name and he lives outside the states...he gets here by the end of the month and the kentucky plates will be gone by then ;)

[Fuzion]

Hmm.... can a Harley come?

[Mark #2]

I'll make a guest appearance just to watch
I'm thinking the same thing.

[LivinEZ]

I'm in I need to see what the Gen 2 will pull

+1

[tiffo60]

Hmm.... can a Harley come?

all is welcome:D

[slick-svt]

I didn't realize it but my wifes car is being sold on Sat.if all goes well i be might be last :(

[5W0P3]

Mine still has Kentucky plates :o

the truck is in my dads name and he lives outside the states...he gets here by the end of the month and the kentucky plates will be gone by then ;)

Uh oh... Tiff... are Kentucky plated trucks allowed!? http://www.swopeoffice.com/texasflag.gif

haha just kiddin :D

[tiffo60]

Uh oh... Tiff... are Kentucky plated trucks allowed!? http://www.swopeoffice.com/texasflag.gif

haha just kiddin :D

he may get treated like the redheaded step child :evil

[Fuzion]

all is welcome:D


Awsome. Heck.... it could have a Whipple by Saturday. If not, it'll still be on the ported Heaton.

[SVTJoseCuervo]

he may get treated like the redheaded step child :evil

:eek2: :d :burnout:

[Sixpipes]

Unfortunately, I don't have a whole day available to spend at the dyno. The only way I could do it would be to keep it to a couple of hours. In that case, it might not be a bad idea for the dyno guy to give us a schedule so that we won't be standing around all day. Maybe we can fill in the time slots in advance to make it go more smoothly. Just an idea...:cool:

[SVTJoseCuervo]

Unfortunately, I don't have a whole day available to spend at the dyno. The only way I could do it would be to keep it to a couple of hours. In that case, it might not be a bad idea for the dyno guy to give us a schedule so that we won't be standing around all day. Maybe we can fill in the time slots in advance to make it go more smoothly. Just an idea...:cool:

just ask to be 1st...im sure alot of us have nothing else to do :rolleyes:

[tiffo60]

Unfortunately, I don't have a whole day available to spend at the dyno. The only way I could do it would be to keep it to a couple of hours. In that case, it might not be a bad idea for the dyno guy to give us a schedule so that we won't be standing around all day. Maybe we can fill in the time slots in advance to make it go more smoothly. Just an idea...:cool:

since its us thats running the show we can choose who goes on when, so when you show up, we can get you strapped down and make your pulls:tu:

i know the guy and he will let us do it however we choose

[G'Lightning]

Count me in...:burnout:.............Roy i'll bring by the helmet also.

[Sixpipes]

since its us thats running the show we can choose who goes on when, so when you show up, we can get you strapped down and make your pulls:tu:

i know the guy and he will let us do it however we choose

I'd like to go somewhere between 10AM and noon if possible and I know Ronny would prefer the same. Not being anti-social, but the little woman has plans for me on Saturday etc... :tex

NOTE: An Aluminum Foil Deflector Beanie (AFDB) is a type of headwear that can shield your brain from most electromagnetic psychotronic mind control carriers. AFDBs are inexpensive (even free if you don't mind scrounging for thrown-out aluminium foil) and can be constructed by anyone with at least the dexterity of a chimp (maybe bonobo). This cheap and unobtrusive form of mind control protection offers real security to the masses. Not only do they protect against incoming signals, but they also block most forms of brain scanning and mind reading, keeping the secrets in your head truly secret. AFDBs are safe and operate automatically. All you do is make it and wear it and you're good to go! Plus, AFDBs are stylish and comfortable.

http://www.zapatopi.net/afdb/afdbhead.jpg

[gbgary]

I'd like to go somewhere between 10AM and noon if possible... the little woman has plans for me on Saturday

trying out the new taser??

[tiffo60]

I'd like to go somewhere between 10AM and noon if possible and I know Ronny would prefer the same. Not being anti-social, but the little woman has plans for me on Saturday etc... :tex

NOTE: An Aluminum Foil Deflector Beanie (AFDB) is a type of headwear that can shield your brain from most electromagnetic psychotronic mind control carriers. AFDBs are inexpensive (even free if you don't mind scrounging for thrown-out aluminium foil) and can be constructed by anyone with at least the dexterity of a chimp (maybe bonobo). This cheap and unobtrusive form of mind control protection offers real security to the masses. Not only do they protect against incoming signals, but they also block most forms of brain scanning and mind reading, keeping the secrets in your head truly secret. AFDBs are safe and operate automatically. All you do is make it and wear it and you're good to go! Plus, AFDBs are stylish and comfortable.

http://www.zapatopi.net/afdb/afdbhead.jpg

you can be first if you like, and we can do ronnie next:tu:

[RSVT]

were we gonna meet up somewher and roll up there like pack of bad ass trucks:cool: , or jus meet over at the dyno? i only live about 5 mins. away from the dyno, but i would like for us to meet some wher, and just cruise up there

[SVTJoseCuervo]

were we gonna meet up somewher and roll up there like pack of bad ass trucks:cool: , or jus meet over at the dyno?

meet up sounds better :burnout:

[GoldLS1]

Jeff we can roll out together (if ya want)... according to a mutual acquaintance, Nick, we live a few miles apart!!

[5W0P3]

Jeff we can roll out together (if ya want)... according to a mutual acquaintance, Nick, we live a few miles apart!!

Hell yea... just let me know. I'm at Harwood and Central, right by Nick's house.

[FRDRCING]

Im down for a few pulls, I need to check my a/f. Truck is running a little rich. See you all there.

[L8 APEX]

For a small fee I will show up and tweak tunes;) .

[lenard_hester]

For a small fee I will show up and tweak tunes;) .

Terry, I had been asking about a tune, I would absolutely pay you for your time. Put me down for one.

Guess that means I will be at the dyno saturday.

[TXLIGHTNING]

Looks like we are setting up my KB install Sat morning :d . So hopefully I will be there to see what #'s I put down :D .

[Alpine]

Im down for a few pulls, I need to check my a/f. Truck is running a little rich. See you all there.:D You will be suprised. That truck doesnt run rich or it never did when I had it!

Jeff.

[SVTJoseCuervo]

For a small fee I will show up and tweak tunes;) .

I still need to install the 4lb pulley and get the tune....let me know when you can do this :tu:

[02SVTpimp]

Im down, need to see my #'s since i beat a stock L pretty bad the other day and a cobra...

[slick-svt]

I would like to see the difference a tune vs. stock would do. I have a Predator tuner.

[02SVTpimp]

I would like to see the difference a tune vs. stock would do. I have a Predator tuner.

SCT's the way to go, lol

[L-Fever]

SCT's the way to go, lol

A Tornado will add a few more ponies! :D

[TXLIGHTNING]

A Tornado will add a few more ponies! :D :rll: I saw one of those on a truck not to long ago :rll: .

[tiffo60]

:rll: I saw one of those on a truck not to long ago :rll: .

they come standard with the whipples:d , only way they can even come close to the 2.6kb

[SVTJoseCuervo]

Im down, need to see my #'s since i beat a stock L pretty bad the other day and a cobra...

I will call you so we can meet up :beer:

[L-Fever]

they come standard with the whipples:d , only way they can even come close to the 2.6kb

Shhhh! Don't tell everyone man!

http://www.svtgalleries.net/gallery/data/500/orange_ki.jpg

[tiffo60]

Shhhh! Don't tell everyone man!

http://www.svtgalleries.net/gallery/data/500/orange_ki.jpg

combined with one of these and JLP wont even be able to keep up:rll:

http://media.truckblog.com/ai/2006/691.jpg

[L-Fever]

combined with one of these and JLP wont even be able to keep up:rll:

http://media.truckblog.com/ai/2006/691.jpg

Wow! :bows

[slick-svt]

SCT's the way to go, lol
Too late a Predator will have to do for now :)

[BC Lightning]

Looks like I might be able to come early :burnout:

Dante said the 2.6 KB should be here friday as well as the parts from LFP, going to John's shop to install all the odds and ends on thursday so friday will be strickly 2.6KB install day, if it comes in :rolleyes:

Off topic, gotta give a :tu: to Terry and LFP. Terry worked out a deal with LFP to get me store credit since they never sent back my I/C resourvior, well just spoke with Mark and he gave me a brand new LFP cold air kit ($159.00 value) and $150.00 off the black LFP Throttle body which came to roughly $200. not too shabby,

only down side is it will be another 2 weeks before my throttle body will come in, but the air filter kit will be here friday

[L8 APEX]

I have a black TB in stock if you want to owe me one.

[BC Lightning]

I have a black TB in stock if you want to owe me one.

Sending PM

[03stx]

If I get my issues solved by then I will be there.

[GoldLS1]

Hell yea... just let me know. I'm at Harwood and Central, right by Nick's house.

Yep... Im between Mid Cities and Glade right off 360, maybe 5 miles from ya. I was going to give Nick a ring and see if he wanted to go?? Ill let ya know.

[G'Lightning]

Yep... Im between Mid Cities and Glade right off 360, maybe 5 miles from ya. I was going to give Nick a ring and see if he wanted to go?? Ill let ya know. Your right around the corner i live @ Glade and Main ....damn near under the water tower:)

[5W0P3]

My buddy casey just bought his lightning tonight... he'll be coming with me :D I believe he'll be #24 :D

We're gonna need a picture of ALL of the L's together!

[GoldLS1]

Your right around the corner i live @ Glade and Main ....damn near under the water tower:)

Sweet if ya want to roll out with Jeff and I holla... we havent established a location or time yet?? Wherever is good with me.... suggestions??

[5W0P3]

Sweet if ya want to roll out with Jeff and I holla... we havent established a location or time yet?? Wherever is good with me.... suggestions??

How about 8:45ish AM @ Wing House parking lot @ Central & 183

[wesman]

Looks like I might be able to come early :burnout:

Dante said the 2.6 KB should be here friday as well as the parts from LFP, going to John's shop to install all the odds and ends on thursday so friday will be strickly 2.6KB install day, if it comes in :rolleyes:

Off topic, gotta give a :tu: to Terry and LFP. Terry worked out a deal with LFP to get me store credit since they never sent back my I/C resourvior, well just spoke with Mark and he gave me a brand new LFP cold air kit ($159.00 value) and $150.00 off the black LFP Throttle body which came to roughly $200. not too shabby,

only down side is it will be another 2 weeks before my throttle body will come in, but the air filter kit will be here friday

He's trippin. He didn't ship it until late today, it won't be here tomorrow. It will likely be Tues as they don't deliver home deliveries on Mon.

--wes

[Ohmsby]

He's trippin. He didn't ship it until late today, it won't be here tomorrow. It will likely be Tues as they don't deliver home deliveries on Mon.

--wes
just got home from the shop and BC say's Dante might not deliver on Friday

anyone want to caravan from Denton/lewisville sat morning

[BC Lightning]

He's trippin. He didn't ship it until late today, it won't be here tomorrow. It will likely be Tues as they don't deliver home deliveries on Mon.

--wes

when I talked to him thats the feeling I got, oh well guess my truck will have to wait for another dyno day :rolleyes:

edit: just read your e-mail wes

[5W0P3]

when I talked to him thats the feeling I got, oh well guess my truck will have to wait for another dyno day :rolleyes:

how did you find out it shipped today, did you get an e-mail??

You should just meet us... its right where 121 and 183 come together, on the way for ya :)

...unless you came down 35w

[BC Lightning]

You should just meet us... its right where 121 and 183 come together, on the way for ya :)

...unless you came down 35w

still planning on coming out, but I'll be in the stock Vette :(

Wes, it shows delivery date of tuesday 3/27/07, so I guess it didn't got out on tuesday like he said it would and be here friday :rolleyes:

[5W0P3]

still planning on coming out, but I'll be in the stock Vette :(

Wes, it shows delivery date of tuesday 3/27/07, so I guess it didn't got out on tuesday like he said it would and be here friday :rolleyes:


Nothing wrong with vettes. I had a 551rwhp z06 until Feb 23rd. :)
http://i85.photobucket.com/albums/k67/jeffrswope/Corvette%20Z06/DSC03104.jpg

[BC Lightning]

Nothing wrong with vettes. I had a 551rwhp z06 until Feb 23rd. :)

April showed me the pics

[5W0P3]

April showed me the pics

Lol... how do you know April!? Do I know you!? She's at my house right now!

[BC Lightning]

Lol... how do you know April!? Do I know you!? She's at my house right now!

:tex

[GoldLS1]

How about 8:45ish AM @ Wing House parking lot @ Central & 183

Sounds good. See ya there!!

[FRDRCING]

just got home from the shop and BC say's Dante might not deliver on Friday

anyone want to caravan from Denton/lewisville sat morning

John I could meet up some were of 35 with you guys, I am at the goldentriangle keller hicks exit. Just about 1.5 miles from the hwy.

[FRDRCING]

:D You will be suprised. That truck doesnt run rich or it never did when I had it!

Jeff.

We cleaned the intercooler last weekend and changed the plugs and new filter as well. We are going to put a new fuel filter on tonight/early morning and see if that helps. It only does this when you give it a little gas and then let out. I am going to do some data loging and then send it off to get the tune adjusted. I know it's not that far off, because I have had some good blast down 170 and the motor is still running good.

[tiffo60]

Nothing wrong with vettes. I had a 551rwhp z06 until Feb 23rd. :)http://i85.photobucket.com/albums/k67/jeffrswope/Corvette%20Z06/DSC03104.jpg
dang dude, that was on my birthday

[tiffo60]

We're gonna need a picture of ALL of the L's together!

Or better yet it would be a good time to shoot some video, Talon Dyno Day Video

[gbgary]

hey tiff is ryder gonna register here sometime? i have this need to keep a watch on him for some reason. :D

[tiffo60]

hey tiff is ryder gonna register here sometime? i have this need to keep a watch on him for some reason. :D

hes about the most non computer savy person you will ever meet, hes going to join but he needs my help to set his email up so he can register, and since he works nights i can only help him on the weekend so ill get him lined up sunday

[wesman]

when I talked to him thats the feeling I got, oh well guess my truck will have to wait for another dyno day :rolleyes:

edit: just read your e-mail wes

Cool....wasn't sure if you got it or not.

I've got fuel stuff coming, so we'll see how the truck likes it. We can roll over to Mikes (the guy in Bedford where Jeff and I dynoed the Vette & Viper a month or so ago) when you're ready.

--wes

[BC Lightning]

Cool....wasn't sure if you got it or not.

I've got fuel stuff coming, so we'll see how the truck likes it. We can roll over to Mikes (the guy in Bedford where Jeff and I dynoed the Vette & Viper a month or so ago) when you're ready.

--wes

Sounds good, having two 2.6 KB'd trucks on the dyno will be pretty cool

I have a few things to do as well, mainly waiting on my 4-link to get finished up so I can run the JDM Big fuel system while the bed is off, also need to buy coil overs, and a bunch more stuff on the list

I figured once I got a big supercharger and built motor the list would get smaller, but it has only grown :rolleyes:

*Update*
John and I tackled a few different things on both our trucks last night. We ran the lines from JLP supercooler in the bed and wraped them with heat insulation to make sure they don't hit the headers if they move for some reason, I doubt they will, the zip ties John gave me were huge :eek:

I also started the coolant crossover mod on the lower intake to relieve the coolant that gets collected on the driver side head, will be installing that today as well as putting the midplate and intercooler back on

also changed the plugs which took all of 5 min with the intake off, to NGK BR7's and put a new AEM wideband O2 sensor in

Too bad I wont be the 25th truck at the dyno :(

[Fuzion]

Got it marked down, i plan on being there! A friend of mine might tag along, either riding with me or bringing his GMC.

9:30am is early... so i might be more like 10 - 10:30ish

[slick-svt]

Hey Tiff, You better put me down as a maybe I'm selling a car on Sat. and pickup time is uncertain. If I can't get there on time I'll go last :(

[Silver_2000]

just got home from the shop and BC say's Dante might not deliver on Friday

anyone want to caravan from Denton/lewisville sat morning

What time ??

My Lightning and a 500 hp mustang are interested in catching the caravan

[Ohmsby]

What time ??

My Lightning and a 500 hp mustang are interested in catching the caravan

I may go down 35 W out of Denton but we could do race cakes @ the Cracker barrel and then head south probably out of the way for some but I am up for going thru Lewisville I am open to suggestions:D

[Silver_2000]

I may go down 35 W out of Denton but we could do race cakes @ the Cracker barrel and then head south probably out of the way for some but I am up for going thru Lewisville I am open to suggestions:D
What time ?

[G'Lightning]

Cant make it have to fly out tomorrow morn. for work:mad: .. Gotta feed the monkey yea know..Yall have a good time:beer:

[Ohmsby]

What time ?

1. if we meet in Denton for Breakfast around 7:30 if we want to be at the Dyno place @ 9:30

2. If we go thru Lewisville we could go to the cracker barrel by grapevine mills and meet around 8 or so

3. or to hell with breakfast and just meet @ QT on 121 around 8:45 or a local starbucks bottom line I need JAVA

[L8 APEX]

I'll leave Plano about 5am and head to Alvarado to hookup to the trailer. Then I may catch a WH and head up through Ft Worth out to Saginaw by 7 something. Then back to Alvarado to put the trailer up and back home to Plano:hammer: . It's gonna be a long day...

[tiffo60]

I'll leave Plano about 5am and head to Alvarado to hookup to the trailer. Then I may catch a WH and head up through Ft Worth out to Saginaw by 7 something. Then back to Alvarado to put the trailer up and back home to Plano:hammer: . It's gonna be a long day...

is there no way to get the trailer tonight, and just leave it hooked up overnight so you can leave straight out from plano in the am?

[Silver_2000]

1. if we meet in Denton for Breakfast around 7:30 if we want to be at the Dyno place @ 9:30

2. If we go thru Lewisville we could go to the cracker barrel by grapevine mills and meet around 8 or so

3. or to hell with breakfast and just meet @ QT on 121 around 8:45 or a local starbucks bottom line I need JAVA

Since Ill likely bump myself from the actual pulls Im not going anywhere at 730 am

If David wants to meet you guys thats cool ...

Maybe a starbucks on 121 is doable -

[L8 APEX]

is there no way to get the trailer tonight, and just leave it hooked up overnight so you can leave straight out from plano in the am?
No trailers allowed in the complex, plus it would get pilfered anyway as I would have to park half a mile away.

[Ohmsby]

No trailers allowed in the complex, plus it would get pilfered anyway as I would have to park half a mile away.

does this mean I have to bring you the C note that I screwed you out of last time:D

[03stx]

I would meet up and join the convoy from Denton but I just found out I will be out of town this weekend. So count me out on saturday. kind of sucks, oh well I guess I will have to catch the next dyno day.

[Fuzion]

How late will this be going on? I might have to work tomorrow, but i should be out of here by noon. Then its about an hour drive to Saginaw.

Are other vehicles allowed? Maybe a Paxton powered 07 Mustang GT?

[TXLIGHTNING]

I will see you guys there :D . I'm showing up early and Terry will be installing my KB and some other parts on the spot :tu: (Terry is the MAN). Then we will see what #'s I put down. :beer:

[Ohmsby]

John I could meet up some were of 35 with you guys, I am at the goldentriangle keller hicks exit. Just about 1.5 miles from the hwy.

Starbucks @8:00 next to the Waffle house at the western center exit and then to Dynofest hopefully Doug will bring his camera

[99WhiteBeast]

Gotta feed the monkey yea know..

Lebowskism:cool: take er easy man

[FRDRCING]

Starbucks @8:00 next to the Waffle house at the western center exit and then to Dynofest hopefully Doug will bring his camera

Sounds good to me John, I will bring my camera as well.

Tyson

[Sixpipes]

I've got a hitch to put on the rat rod tomorrow and I have been out of town all week. Still haven't had time to fix my oil issues, so I'm probably not going to make the event. Looks like there will be plenty of folks there to keep the place busy. :cool:

[Gukimuchi17]

Looks like my day is planned which is not going to get to include a "dyno"
I'll need to try and make it another time.

[RSVT]

i will be heading out bout 10 or 1030ish...Steveo dont forget my sticker bro thanks........

[GoldLS1]

Sounds good to me John, I will bring my camera as well.

Tyson

Yep Ill bring both my Sonys...

[Silver_2000]

Well the turnout was good

- Amazing really - Lots of new guys - I sorta felt like the AARP rep ...

The pictures I took are here - couple of movies as well
http://www.svtgalleries.net/gallery/showgallery.php?cat=6124
Feel free to add your pics to the same category

http://www.svtgalleries.net/gallery/data/6124/medium/P1140159_Large_.JPG
http://www.svtgalleries.net/gallery/data/6124/medium/P1140157_Large_.JPG
http://www.svtgalleries.net/gallery/data/6124/medium/P1140152_Large_.JPG
http://www.svtgalleries.net/gallery/data/6124/medium/P1140133_Large_.JPG

[99WhiteBeast]

Great turnout-some people layed down some great numbers.

It was good to put some board names with faces and meet some new peeps.

[SVTJoseCuervo]

Great turnout-some people layed down some great numbers.

It was good to put some board names with faces and meet some new peeps.

knana

Thanks for that phone call man :tu: (817) 932 3406 (update the number :evil )

I was the only one with the everything stock :flaming:

[99WhiteBeast]

knana

Thanks for that phone call man :tu: (817) 932 3406 (update the number :evil )

I was the only one with the everything stock :flaming:

No problem-hope you didn't get a ticket. My blinders and V1 saved my arse again:bows Passed him doing about 90. I'll update the number

[RSVT]

great turn out guys i only put 370hp and big john killed us with 580+hp:beer: good job john, well it was great seeing all you guys with L's

[Ohmsby]

Good times got to see a new Shelby pull and got to bullchit with the boys and Tiff pointed us towards some great BBQ

Thanks for setting up Dynofest Tiff I counted 21 L's and the Shelby:D

[slick-svt]

I was running late like 3:30 late, but I was able to set up a Mon. run. :mad:

[gbgary]

http://www.svtgalleries.net/gallery/data/6124/medium/P1140157_Large_.JPG

well..........what did m, i mean RYDER'S, truck put down?

[FRDRCING]

Thanks Tifton for the dyno setup. Had a good time and a good turn out.

John, pops said that truck is just sick:bows . He sends his thanks for the Ride.

[wesman]

Any updates on #'s?

It looks like John hit 58x/60x?? What kind of boost/timing?

Turnout looked awesome, wish the truck could have made it, I had to go house hunting anyway but I might have postponed it if I had my fuel issues solved.

Glad everyone had fun and safe

--wes

[L-Fever]

Wow, great turnout! What kind of power did the Gt-500 make? Nice numbers John, for 12 degrees timing ! :cool: knana

[FRDRCING]

Any updates on #'s?

It looks like John hit 58x/60x?? What kind of boost/timing?

Turnout looked awesome, wish the truck could have made it, I had to go house hunting anyway but I might have postponed it if I had my fuel issues solved.

Glad everyone had fun and safe

--wes

I think he said he had 20 lbs of boost on 12 deg. timing. He hit 589hp and I forgot what the tq. was.

[Lyfisin]

Had a great time! Too late I've realized I'm a little sunburned. :tongue:

[G'Lightning]

Glad i got to make it:) . Had a good time...nice seeing some of yall again. - Gary

[5W0P3]

knana
I was the only one with the everything stock :flaming:

I was the first one that dyno'd. I was 100% stock too! a WHOLE 335rwhp/400tq.

But... i've already modded it since i've been home :D

[Ohmsby]

Running 12* timing and about 18-19lbs boost

589.01 RWHP 601.29 torque

The Shelby put down 430 something bone stock

[5W0P3]

Here are the pics I took. Had a great time guys! Lunch was awesome!

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04042.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04043.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04044.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04045.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04046.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04048.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04049.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04050.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04051.jpg

[5W0P3]

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04052.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04053.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04054.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04055.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04056.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04057.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04061.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04062.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04066.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04069.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04070.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04071.jpg

[5W0P3]

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04073.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04074.jpg
I LOVE THESE TIPS!
http://i85.photobucket.com/albums/k67/jeffrswope/DSC04075.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04076.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04077.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04078.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04079.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04080.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04083.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04084.jpg

http://i85.photobucket.com/albums/k67/jeffrswope/DSC04086.jpg

[SVTJoseCuervo]

I was the first one that dyno'd. I was 100% stock too! a WHOLE 335rwhp/400tq.

But... i've already modded it since i've been home :D

:beer:
351hp/420tq stock....I have the mod bugg big time now...time to get a part time job just for mods haha :)

Wish I could of stayed for the lunch but hasd stuff to do after that but good times :tu:

Roy...I still dont believe all your friends with the Ls live in the same Nhood as you do :burnout:

[Silver_2000]

Jeff

Nice pictures !!

It would be great if you would upload them to YOUR gallery here so we can get easier access to them ...


http://www.svtgalleries.net/gallery/showgallery.php?cat=6124

Thanks
Doug

[02SVTpimp]

Had a great time and it was nice meetin all u guys that showed up, first time for me... but my #'s were 400hp/498tq not bad on only bolt ons, i need more power:evil sry couldnt go for bbq, had work at 3, but we should all do a day at the track sometime soon...

[Sixpipes]

Nice numbers John. :tu: :tu: Looks like a nice facility. What was everyone's opinion about the place? :cool:

[02SVTpimp]

Nice numbers John. :tu: :tu: Looks like a nice facility. What was everyone's opinion about the place? :cool:

yea johns beast was on the dyno when i rolled up, after seein the #'s i didnt even wanna put my truck up there, lol but in all the place was pretty nice, only 30 dollars for 2 runs, not bad...

[Ohmsby]

Nice numbers John. :tu: :tu: Looks like a nice facility. What was everyone's opinion about the place? :cool:



Thanks, I look forward to seeing what we can do on a race tune.

Lots of L's and a great looking Shelby on hand

We need to see the "Rat Rod" on the strap.... I thought the venue was great.
:banana:

[Silver_2000]

Nice numbers John. :tu: :tu: Looks like a nice facility. What was everyone's opinion about the place? :cool:

the equipment looks new and well maintained
the employees were pleasant and efficient ...

Thats a combination thats hard to find at the dynos I have been to...

Only down side is the 90 mile round trip ... But the Nav system in Davids GT500 made it easier ... Its a DAMNED shame I cant put that NAV system in my truck...

[Fuzion]

Looks like ya'll had fun! I wanted to come but had to work this morning and didn't get out till nearly 1:30 so i figured by the time i got there it'd of been nearly 3.

What does Johns truck have on it? Is it the truck picture with the whipple?

[G'Lightning]

What does Johns truck have on it? Is it the truck picture with the whipple? Yep its the red one with the polished whipple:bows

[GoldLS1]

I think my farm truck is broke... 387/450 (mods: KB at 12ish lbs?, JLP intake, cone, and tune). Time for more mods I guess. Tifton the BBQ place was damn good. And Jeff the price is now $450!! I need to adjust them up some, my 4x4 stance makes them point too low. Going to pick up some fog bulbs today.

[Fuzion]

Yep its the red one with the polished whipple:bows


Awesome. I just ordered a black Whipple myself. Can't wait to see numbers, i'd be :santa if my numbers are near his.

[99WhiteBeast]

I think my farm truck is broke... 387/450 (mods: KB at 12ish lbs?, JLP intake, cone, and tune). Time for more mods I guess.

Zac, get the supporting mods (injectors and fuel pumps) to turn the wick up to 16 psi and you'll get the numbers you want:cool:

[Mark #2]

Zac, get the supporting mods (injectors and fuel pumps) to turn the wick up to 16 psi and you'll get the numbers you want:cool:

I agree, but 486/541 before the MAF, pumps, and injectors on mine.
KB at low boost are not that great.

[wesman]

Zac, get the supporting mods (injectors and fuel pumps) to turn the wick up to 16 psi and you'll get the numbers you want:cool:


Also keep in mind the stock block....John is on a built block....that much power on a stock block is gonna last about as long as those two dyno runs

--wes

[5W0P3]

I think my farm truck is broke... 387/450 (mods: KB at 12ish lbs?, JLP intake, cone, and tune). Time for more mods I guess. Tifton the BBQ place was damn good. And Jeff the price is now $450!! I need to adjust them up some, my 4x4 stance makes them point too low. Going to pick up some fog bulbs today.


$250 today... its after midnight now, $200 tomorrow, get it while its hot!

[GoldLS1]

$250 today... its after midnight now, $200 tomorrow, get it while its hot!

Haha... Ill keep my eye out for a set. Ill PM ya with some that I was goin to try.

[FRDRCING]

hey tiff is ryder gonna register here sometime? i have this need to keep a watch on him for some reason. :D

Gary saw the truck at the dyno day, and it still looks good. Going to be king of bling for a now;) .

[gbgary]

Gary saw the truck at the dyno day, and it still looks good.

i know. i was joking. do you know what it dynoed?

[GoldLS1]

i know. i was joking. do you know what it dynoed?

Hopefully Ryder doesnt mind me saying but it was 40x hp / ??? tq

[tiffo60]

i know. i was joking. do you know what it dynoed?

he put down 404hp and i cant remember what the torque was

mine put down 480hp @ 580 tq, but that was with a 10.5 Air to Fuel and low timing

all in all it was a great turn out and was nice to see all those trucks in the parking lot, there should be some good video of it all:tu:

[slick-svt]

I'm going this morning to do a belated pull....:banana:

[L8 APEX]

I think my farm truck is broke... 387/450 (mods: KB at 12ish lbs?, JLP intake, cone, and tune). Time for more mods I guess. Tifton the BBQ place was damn good. And Jeff the price is now $450!! I need to adjust them up some, my 4x4 stance makes them point too low. Going to pick up some fog bulbs today.
You aren't making any boost you need to pulley it up and retune it. It is running good for the 10-11psi it is making. If you have a stock lower pulley you need a 2.75 upper. Tony's truck only made 411 or so at 13psi on a hot off the street pull. When you get to 15psi or so you get to 430ish pretty easily.

[gagspa]

Looks like a good time. I wish that I could have been there, but I was pretty near (Pennington Field) most of the day. :(

[TXLIGHTNING]

You aren't making any boost you need to pulley it up and retune it. It is running good for the 10-11psi it is making. If you have a stock lower pulley you need a 2.75 upper. Tony's truck only made 411 or so at 13psi on a hot off the street pull. When you get to 15psi or so you get to 430ish pretty easily. My truck was hot as hell from data logging. I believe my #'s would have been much better with a good cool down. The first hot pull made 417rwhp and 480tq. The second was 411rwhp and 477tq, both at 12-13Lb's boost and a flat 11.0 A/F.

[slick-svt]

Finally got in and got it done 352hp and 408tq truck was a little lean around 11.5 I did a quick adjustment and brought it up to 13.5. After 5000rpm started leaning out

[BC Lightning]

Finally got in and got it done 352hp and 408tq truck was a little lean around 11.5 I did a quick adjustment and brought it up to 13.5.

11.5 to a 13.5?? 12.0 and up is way too lean unless you have a built block

11.0-11.5 is a good a/f number

[tiffo60]

11.5 air to fuel, you should have left it there

[slick-svt]

He said it was lean, Its any easy adjustment to put it back

[L8 APEX]

Finally got in and got it done 352hp and 408tq truck was a little lean around 11.5 I did a quick adjustment and brought it up to 13.5. After 5000rpm started leaning out
Folks we have a tuning genius on board:bows :D .
The basics are 14.7 is stoich or cruising mix. The lower the number the richer is 11.0 and 13.5:1 is leaner. You want to stay under 12.0 to keep it in one piece. Naturally aspirated vehicles make their best power at 12.6 to 12.7 is where we run most LS1 type configs. Boosted stuff we run under 12.0. Kenne Bell recommends 11.1 A/F for using his blower on stock engines if you read the manual.
The only reason you drove away from that shop was because you aren't making any power to do any damage. Be careful with that tuning. What kind of change netted two whole A/F points? That is a lot for user adjustablility..

[slick-svt]

Well thats what he said??? :hammer:

[slick-svt]

Wouldn't hurt it none to richen it up, just not as much HP?? It was 2% on the rich side and I set it to 4%. Maybe it started at 13.5 a/f and I got it to 11.5

[BC Lightning]

Wouldn't hurt it none to richen it up, just not as much HP?? It was 2% on the rich side and I set it to 4%. Maybe it started at 13.5 a/f and I got it to 11.5

post up your dyno sheets :tu:

[tiffo60]

Wouldn't hurt it none to richen it up, just not as much HP?? It was 2% on the rich side and I set it to 4%. Maybe it started at 13.5 a/f and I got it to 11.5

that would make more sense:cool:

[slick-svt]

OK, don't think it has a/f on it. POS won't upload?

[slick-svt]

OK, don't think it has a/f on it. POS won't upload?

OK see if this works, well its in the gallery can't get it on this page

[BC Lightning]

OK see if this works, well its in the gallery can't get it on this page

Nope doesn't have air/fuel, so I take it they didn't use the exhaust sniffer when you did your pulls?? Do you have a wideband??

http://www.svtgalleries.net/gallery/data/6124/medium/lightning_dyno.jpg

[slick-svt]

Thanks, haven't figured everything out yet

[BC Lightning]

Thanks, haven't figured everything out yet

:tu:

[TXLIGHTNING]

Nope doesn't have air/fuel, so I take it they didn't use the exhaust sniffer when you did your pulls?? Do you have a wideband??

http://www.svtgalleries.net/gallery/data/6124/medium/lightning_dyno.jpg Nope. No A/F readings on the dyno pulls. You had to have a wideband in the truck. There was no cool down or tune tweaking in between runs either, one run right after the other.:rolleyes:

[tiffo60]

they have the tail pipe sniffer, but they said its not very accurate, so they wanted you to have wide band they could just hook into the sensor, or an O2 bung they could screw there sensor in to

[slick-svt]

Yep, both runs about 3mins apart. And when I asked about the a/f they asked if I had one in the trick, then they stuck the sniffer in the ex pipe.
Did yall get to cool down between runs?

[L8 APEX]

A good tailpipe sniffer works just fine. I have used both over at Well's and they were always within .1 through cats, mufflers anything.

[wesman]

A good tailpipe sniffer works just fine. I have used both over at Well's and they were always within .1 through cats, mufflers anything.


Agreed, I can't couunt the # of dyno runs I've made w/ various cars and the tailpipe sniffers are always with .1-.2 of the wideband.

--wes

[gbgary]

he put down 404hp and i cant remember what the torque was




the tune on it right now is real rich. it needs a dyno tune to work it's best (per steig.). i was gonna have terry dyno tune it but never got to it. i'm sure a 2400 maf will be needed too.

[Sandman]

So I have a question about the dyno. Is there a way thru a tune or something we can lock our trucks into a gear so that we could get results from down low to up high?

I mean, if you look at the dyno sheets, right now we are only able to see less than half of our engine range.

[tiffo60]

So I have a question about the dyno. Is there a way thru a tune or something we can lock our trucks into a gear so that we could get results from down low to up high?

I mean, if you look at the dyno sheets, right now we are only able to see less than half of our engine range.

terry said he could load a "dyno tune" to were it would lock in 3rd with out down shifting so you could pull from the lower rpms

[L8 APEX]

terry said he could load a "dyno tune" to were it would lock in 3rd with out down shifting so you could pull from the lower rpms
I load a dyno shift schedule into the trucks for tuning so I can roll them up from 2600rpm. That 80 punch crap is annoying.

[slick-svt]

Nope. No A/F readings on the dyno pulls. You had to have a wideband in the truck. There was no cool down or tune tweaking in between runs either, one run right after the other.:rolleyes:
I paid $15 extra for it I thought it would be on the sheet??? One of these days when I get some extra cash Terry I want to get a few things done to my truck, it has the engine for life program and the shop foreman said I could do exhaust and intake stuff but I couldn't change out the pulleys. Since you work on these all the time you know what works and what don't. I don't want to spend money on stuff I don't need.

[wesman]

I paid $15 extra for it I thought it would be on the sheet???

Should have been....you've been swindled :rll:

[slick-svt]

Should have been....you've been swindled :rll:
They were kinda in a hurry I guess they had someone comin in, makes me kinda :mad:

[tiffo60]

They were kinda in a hurry I guess they had someone comin in, makes me kinda :mad:

go back up there and ask them to print it out with the air to fuel on it, they save all the dyno files:tu:

[slick-svt]

I just might do that

[slick-svt]

go back up there and ask them to print it out with the air to fuel on it, they save all the dyno files:tu:
Ok Tiff, I got the a/f chart now how the hell do I get it out of the gallery to this page???? :hammer:

[TXLIGHTNING]

Ok Tiff, I got the a/f chart now how the hell do I get it out of the gallery to this page???? :hammer:Here you go. :tu:

[slick-svt]

Here you go. :tu:
Thanks, That was the second run after I made tuning adjustment 4% rich total

[tiffo60]

i would say that its real lean and to stay out of the boost till you can get it adjusted:eek:

[slick-svt]

i would say that its real lean and to stay out of the boost till you can get it adjusted:eek:
See the red line at 13 is this their safe line?

[TXLIGHTNING]

i would say that its real lean and to stay out of the boost till you can get it adjusted:eek:My thoughts exactly. :eek2:

[tiffo60]

See the red line at 13 is this their safe line?

this is were yours should be, and there a supra shop, dont listen to them when it comes to our trucks, we use them for there dyno and nothing else:D

http://www.svtgalleries.net/gallery/data/500/air_fuel_chart1.jpg

[slick-svt]

I can make it richer, but whats the limit on a tuner?:confused:

[tiffo60]

I can make it richer, but whats the limit on a tuner?:confused:

fuel is your friend, max it out and see where your at, i think the predator only allows you to add like 10%, but they may have changed it since i had mine a couple of years ago, and if all else fails, get someone who deals with diablo to email you some tunes

[TXLIGHTNING]

I can make it richer, but whats the limit on a tuner?:confused:My XCal2 will allow 25% up or down.

[slick-svt]

Is an SCT any better and what do they run?

[tiffo60]

Is an SCT any better and what do they run?

one is no better than the other, its all who loads the tune in them that matters, I like the predator because you can datalogg with out a laptop, but i switched to sct because thats what terry used, but most big name tuners can tune with both, I know JLP, RWTD for sure can tune with diablo

[slick-svt]

fuel is your friend, max it out and see where your at, i think the predator only allows you to add like 10%, but they may have changed it since i had mine a couple of years ago, and if all else fails, get someone who deals with diablo to email you some tunes
Yep 10% is it

[BC Lightning]

Ok Tiff, I got the a/f chart now how the hell do I get it out of the gallery to this page???? :hammer:

when your in the gallery click on the pic, then at the bottom of the page cut/copy the link and copy it into the post

[slick-svt]

when your in the gallery click on the pic, then at the bottom of the page cut/copy the link and copy it into the post
:tu: