View Full Version : Puttin in a FTVB, which fluid??
GoldLS1
04-14-2007, 09:09 AM
Questions in the title... I bought Mobil 1, yes/no-thenwhat??
dboat
04-14-2007, 09:11 AM
Questions in the title... I bought Mobil 1, yes/no-thenwhat??
yes, get the 4x4 pan, change filter and pan with gasket..
GoldLS1
04-14-2007, 09:31 AM
I got the 4x4 pan and filter too, but Im going to reuse the stock gasket.
Shiner1
04-14-2007, 01:54 PM
Mobil 1 is good. I used Royal Purple when I put my FTVB in. I don't think either choice is bad. Did mine in the garage, on jack stands......messy or I'm just a slob. Not sure which.:d
GoldLS1
04-14-2007, 08:48 PM
Yep, did it in a garage on jack stands today... made a mess too. But it sure shifts like hell!! Excellent mod.
slick-svt
04-14-2007, 09:26 PM
I know this sounds stupid but what is a :confused: ftvb? (ford truck valve body?)
Sandman
04-14-2007, 09:39 PM
I know this sounds stupid but what is a :confused: ftvb? (ford truck valve body?)
Factory Tech Valve Body
slick-svt
04-14-2007, 09:48 PM
Thanks for the info:tu:
my2002lightning
04-16-2007, 12:47 AM
No FTVB here, but I've been running RP recommended fluids in the engine and transmission on prescribed intervals with good results.
Ronald
SILVER2000SVT
04-16-2007, 11:08 AM
You can use the Mobile 1 but IMO it's a waste. The factory transmission fluid is a good fluid.
If you chose synthetic make sure you do a complete flush all 17-19 quarts worth. You don't want to have half of one fluid and half of another in there. 17-19 quarts of synthetic starts to get very expensive at $6 each, I would just got get the factory fluid from the dealer for $2 per quart.
L8 APEX
04-16-2007, 06:15 PM
Now we need to retune it for the valve body:hammer:.
GoldLS1
04-16-2007, 08:38 PM
whatcha mean?? The handheld said my shift pressure was 0??
L8 APEX
04-17-2007, 11:29 AM
That is the user setting, I have about ten in that that one that is why it shifts so hard.
99WhiteBeast
04-18-2007, 07:48 PM
You can use the Mobile 1 but IMO it's a waste. The factory transmission fluid is a good fluid.
If you chose synthetic make sure you do a complete flush all 17-19 quarts worth. You don't want to have half of one fluid and half of another in there. 17-19 quarts of synthetic starts to get very expensive at $6 each, I would just got get the factory fluid from the dealer for $2 per quart.
+1
I heard Ford is no longer making the MERCON III that is spec'd for our trucks. They are recommending MERCON V in a TSB for all Ford trans
I'm going to see if the local dealer still has a case or two sitting on the shelf.
vBulletin, Copyright ©2000-2024, Jelsoft Enterprises Ltd.