GoldLS1
04-15-2007, 10:39 PM
Well this weekend I decided to pull the Phantom boost gauge back out and see if I could fix it (turns out it needed to be sealed better). So I put teflon(sp?) on the threads and tightened the brass crush fitting tighter. Now its fuctional!! Vac is 20-24... I peaked down at the boost to catch 15lbs http://www.talonclub.com/forum/images/smilies/burnout.gif !!
Add that with the FTVB and the rear kicks sideways on the 1-2!! And chirped the 2-3 http://www.talonclub.com/forum/images/smilies/biggrin.gif .
Next weekend hope to put in the dual 255s, and hopefully the weekend after that headers, TDs, 4# lower, 60# injectors.
I guess Ill be needing some traction bars and slicks next. I have to admit the truck is finally getting fun.
Sent ya a PM Terry....
Add that with the FTVB and the rear kicks sideways on the 1-2!! And chirped the 2-3 http://www.talonclub.com/forum/images/smilies/biggrin.gif .
Next weekend hope to put in the dual 255s, and hopefully the weekend after that headers, TDs, 4# lower, 60# injectors.
I guess Ill be needing some traction bars and slicks next. I have to admit the truck is finally getting fun.
Sent ya a PM Terry....