More help--traction bar front pics

[sonicbluetommy]

Thanks for the quick response on the back of the traction bars.

Any pics of the front now? The Ford guys don't seem to have a clue about after market parts!!!

[L8 APEX]

You gotta be kidding me... NO!

[L8 APEX]

You bolt the rear bracket on the axle.
You put the bar in the bolt it.
install the front braket onto the bar with a bolt.
Raise front bracket into position and vise grip it to the frame.
Drill 4 3/8 holes for each bracket.
On drivers side watch fuel lines and install bolts from the inside out to prevent chaffing.
Tighten all harware and you are done.

[L8 APEX]

Tell them they owe me 100 bucks for illustrated directions.

[TXLIGHTNING]

Tell them they owe me 100 bucks for illustrated directions.:evil:evil:evil

[tiffo60]

when we put mine on we mounted the rear first the just held the fronts up with the bars attached and drilled the holes

[Mark #2]

Also the rear must be loaded with the weight of the truck before drilling the holes.

[L8 APEX]

Yeah I forgot that part, it cannot be on a two post lift with the wheels hanging. Either a drive on lift or set and axle on stands. Thanks Mark,

[TXLIGHTNING]

Yeah I forgot that part, it cannot be on a two post lift with the wheels hanging. Either a drive on lift or set and axle on stands. Thanks Mark, Damn Terry :hammer: :evil:evil:twitch: