PDA

View Full Version : Bushings



Chris94L
12-30-2007, 03:46 PM
Anyone know a good source for bushings, or someone who can turn some material (delrin?) to size for a set of bushings? I have lowering I-beams on my truck, and the bushings in them are extremely soft, which is causing a misalignment (toe in).

L8 APEX
12-30-2007, 08:45 PM
Check with Summit Racing or Energy Suspension. They should make bushings for that app. Delrin is too hard urethane will be plenty firm.

TXLIGHTNING
12-31-2007, 02:29 PM
Anyone know a good source for bushings, or someone who can turn some material (delrin?) to size for a set of bushings? I have lowering I-beams on my truck, and the bushings in them are extremely soft, which is causing a misalignment (toe in). +1 on the polyurethane bushings :tu:

Chris94L
02-27-2008, 02:38 PM
I finally got around to pulling a bushing out of one of the arms. the bolt sleeve wobbles inside the bushing :eek: The tube on the arm is 1.75" ID x 1.5" wide. This is the closest bushing I could find similar to what was inside it already. The length of the internal metal sleeve is the same as well. Would there be any problem with a slight gap between the bushings inside the tube?

http://www.energysuspensionparts.com/proddetail.asp?prod=9.9484

Ohmsby
02-27-2008, 03:07 PM
I have a bushing set for a gen 1 from energy I would part with for a little green NIB

Chris94L
02-27-2008, 03:13 PM
the stock I-beam pivot bushings are a different style than the lowering I-beam bushing

charlie
02-27-2008, 08:23 PM
Ask Steve. (Mustgofaster) He has a full list and part #'s

Charlie