Bushings

[Chris94L]

Anyone know a good source for bushings, or someone who can turn some material (delrin?) to size for a set of bushings? I have lowering I-beams on my truck, and the bushings in them are extremely soft, which is causing a misalignment (toe in).

[L8 APEX]

Check with Summit Racing or Energy Suspension. They should make bushings for that app. Delrin is too hard urethane will be plenty firm.

[TXLIGHTNING]

Anyone know a good source for bushings, or someone who can turn some material (delrin?) to size for a set of bushings? I have lowering I-beams on my truck, and the bushings in them are extremely soft, which is causing a misalignment (toe in). +1 on the polyurethane bushings :tu:

[Chris94L]

I finally got around to pulling a bushing out of one of the arms. the bolt sleeve wobbles inside the bushing :eek: The tube on the arm is 1.75" ID x 1.5" wide. This is the closest bushing I could find similar to what was inside it already. The length of the internal metal sleeve is the same as well. Would there be any problem with a slight gap between the bushings inside the tube?

http://www.energysuspensionparts.com/proddetail.asp?prod=9.9484

[Ohmsby]

I have a bushing set for a gen 1 from energy I would part with for a little green NIB

[Chris94L]

the stock I-beam pivot bushings are a different style than the lowering I-beam bushing

[charlie]

Ask Steve. (Mustgofaster) He has a full list and part #'s

Charlie