View Full Version : A idea??
slick-svt
02-15-2008, 07:36 PM
Here's a thought, (in theory) there are so many gen 2 superchargers (stock svt) some one needs to make a lower intake for the 351w that will accept the gen 2 blower.....has any one ever had this idea???
TXLIGHTNING
02-15-2008, 07:43 PM
Here's a thought, (in theory) there are so many gen 2 superchargers (stock svt) some one needs to make a lower intake for the 351w that will accept the gen 2 blower.....has any one ever had this idea??? Sound's like a job for Hot Rod's By George.
slick-svt
02-15-2008, 07:47 PM
Think about it you can get a gen 2 blower for under 500 and the make 8-10 lbs of boost...you can't beat it.
Blue Oval Forever
02-15-2008, 07:54 PM
Go to this Board and register.
Look for a thread Titled Old Project Back From Dead M112 on a 5.0
slick-svt
02-15-2008, 08:20 PM
Go to this Board and register.
Look for a thread Titled Old Project Back From Dead M112 on a 5.0
??????????.............:confused:
Chris94L
02-15-2008, 08:55 PM
www.theturboforums.com and then do what bobby said
GoldLS1
02-15-2008, 09:06 PM
Isn't it AN idea?
slick-svt
02-15-2008, 09:10 PM
Isn't it AN idea?
Hukt oN FoNicS.....:icon_neutral:
slick-svt
02-15-2008, 09:23 PM
Here it is......
http://www.tjsperformance.com/images/_m112adapter11.jpg
http://www.tjsperformance.com/images/_m112adapter10.jpg
Don't reall like this one, was thinking about new lower design all in its self.
George....make one?
hotrodsbygeorge
02-16-2008, 01:08 AM
Yes I could
Actually looks kinda easy
I just got done with another intake like i did for Dennis and shipped it off to North Carolina the guy called and said he loved it. Now he wants a Oil pan, cooling module , air inlet and some other stuff.
hotrodsbygeorge
02-16-2008, 01:11 AM
BTW was that a guy selling those adapters or just doing it for himself ?
cause that was one expensive chunk of aluminum he started with.
slick-svt
02-16-2008, 01:27 AM
I just located the thread tonight and haven't read about it. Looks like it might all fit under the hood of a gen 1 lightning.....but by the time all the research and development goes into it probably cost more than vortech..
Use a newer style victor jr. tapped for injectors mill off the top ......
smbony9
03-06-2008, 12:47 AM
I just located the thread tonight and haven't read about it. Looks like it might all fit under the hood of a gen 1 lightning.....but by the time all the research and development goes into it probably cost more than vortech..
Use a newer style victor jr. tapped for injectors mill off the top ......
a friend of mind has a couple of these blowers
slick-svt
03-06-2008, 07:40 AM
Think I'm going to go with a powerdyne for the gen 1 doesn't have super fast plus I drive it every day...........:tu:
vBulletin, Copyright ©2000-2024, Jelsoft Enterprises Ltd.