PDA

View Full Version : QA1 Settings?



TXLIGHTNING
07-16-2008, 02:16 PM
What is the best setting for the track on our trucks? I run them at 5-6 on both sides for the street. What would be a good setting for the track? Thanks guys :beer:

TXLIGHTNING
07-18-2008, 05:55 PM
Thanks guys lol

BC Lightning
07-19-2008, 12:22 AM
your asking a group where the majority don't drag race, and the ones that do don't have QA1's

QA1's are good, but most who drag race use strange adjustable shocks

Its all a trial and error setting, depends if your leaving too hard out of the hole, if your shocks are set too soft, too much to the right/left, what kind of leaf springs do you have, drop hangers, sway bars still on, how do you have your metcos set??

you asked a very generic question and expect a specific answer

If its your DD start out at 7 in front and 5 in the rear, you typically want a 2 number space on a DD, changes if your drag racing

ghostrider
07-19-2008, 08:07 AM
Hey bc this may be (and probably is) a retarded question but what is a metco??

BC Lightning
07-19-2008, 09:59 AM
Hey bc this may be (and probably is) a retarded question but what is a metco??

trac links, traction bars, they make them in uppers (stock ride height) and lowers (lowered trucks), the Metcos are also adjustable

tiffo60
07-19-2008, 04:29 PM
i read alot of people go completely soft in the front (0) and pretty stiff in the back 8 or 9 for drag racing, but im sure every truck/driver is different