new to the site

[nateusmcsvt]

i just want to say hello to everyone at talon.

im 24, live in ennis, modded out red 2001 L

rebuilt the engine myself bolt after bolt.

[nateusmcsvt]

anyone else in or around my town?

[WA 2 FST]

Welcome! Most of the folks on here are in the DFW area... not sure if there are any as far south as you, but whatever, Ennis isn't far.

How fast is your truck? I assume if its modded, you've run it down at the Motorplex. :nana2

[dboat]

Welcome aboard...

Dana

[99bolt]

anyone else in or around my town?

My nephew lives in Telico. 99 white L.

[nateusmcsvt]

i dont know how fast it is... its never fast enough.....

does your nephew work at super one in ennis i think i may see him all the time if so what has he done to the truck? i head that you gave it to him.

[nateusmcsvt]

how come my sig will not show up?

my mods are as follows. hand built by me.

MMR Street Mod 900 Rotating Assembly, Stage 2 Ported Heads, Stage 2 Comp Cams, Over Sized Valves, Port Matched Lower Intake, Stage 3 Ported & Polished Eaton, 2.76 upper, 8# lower, SBTB, JLP CAI and Thunder tube, MAF SCT BIG AIR 2600, ARP Hardware, OBX Long Tubes, 28" Magnaflow, Killer Chiller, 60# DHI injectors, Dual Walbro's 255lph, Oil Sep., NGK TR6's, EGR Delete, 2" Shackle Drop, AAMCO Shift Kit, SCT X3 Programmer.
305/45/18 Nitto NT 555R Drag Tires at the Rear

[nateusmcsvt]

what kinda of power do you guys think i should be putting down?

[Mark #2]

what kinda of power do you guys think i should be putting down?
What is the Total boost and A/F ratio at WOT?

[Silver_2000]

how come my sig will not show up?


Im not a big fan of seeing peoples sigs on every post so ...
You just need to check the box to show your sig

[L8 APEX]

The only mods that make real HP are nitrous and aftermarket blowers/turbos. Kenne Bell and Whipple are the most popular superchargers for adding power.

[dboat]

The only mods that make real HP are nitrous and aftermarket blowers/turbos. Kenne Bell and Whipple are the most popular superchargers for adding power.

Hey, what about that single blade throttle body? :evil

Dana

[ZeusSVT]

Hey, what about that single blade throttle body? :evil

Dana


:d

[ZeusSVT]

Oh and welcome over to Talon! You're one of the fellow G-lounge guys on LR. :burnout:

[In2deep]

Welcome..

[nacklas]

Welcome to the site.

[T Hogg]

Welcome.

I'm out South also in Red Oak.

[99bolt]

does your nephew work at super one in ennis i think i may see him all the time if so what has he done to the truck? i head that you gave it to him.

Thats him. The truck is mostly stock, 2lbs pulley and exhaust. It was his birthday and christmas present for the next 20yrs.

[Shiner1]

Thats him. The truck is mostly stock, 2lbs pulley and exhaust. It was his birthday and christmas present for the next 20yrs.

:rll:

[ZeusSVT]

Thats him. The truck is mostly stock, 2lbs pulley and exhaust. It was his birthday and christmas present for the next 20yrs.


:rll::rll::rll: Brilliant!!

[nateusmcsvt]

What is the Total boost and A/F ratio at WOT?

16psi at 11.5 a/f

[Mark #2]

16psi at 11.5 a/f

440HP and 500TQ

[nateusmcsvt]

sounds kinda low to me.

[dboat]

sounds kinda low to me.

thats at the rear wheels I think.. but Mark would know for sure.

Dana

[nateusmcsvt]

another board is saying im around 500 to the wheel.

i plan to go to the track tonight to get a time and maybe that will help trying to find the rwhp.

[dboat]

another board is saying im around 500 to the wheel.

i plan to go to the track tonight to get a time and maybe that will help trying to find the rwhp.

I would trust Mark over any other board..

Dana

[Silver_2000]

i would trust mark over any other board..

Dana

+100

[nateusmcsvt]

well guys i ran a 12.4 spinning out off the tree a lil friday night at the ennis track.

[WA 2 FST]

well guys i ran a 12.4 spinning out off the tree a lil friday night at the ennis track.

That's a good running truck... probably right at 440rwhp as the others have said.

What was the trap speed?

[nateusmcsvt]

110.7 it could go faster but the track prep was horrid and hard to keep from spinning.

[WA 2 FST]

Yeah, some people don't realize that a little spin is fine regarding trap speed, but if you're spinning 100-200' out of the hole, then your ET _and_ trap speed suffer.

Nearly 111mph isn't bad, though. I think with your build motor, ported heads, etc, when the time/finances allow an aftermarket KB or Whipple blower will do wonders over the ported stocker.

Just for reference, when mine ran 109mph, it made 390rwhp/460rwtq. I didn't have the wheelspin issue, though. It was a stock weight truck in that configuration.

[nateusmcsvt]

okay i just buight a FTVB and a 2400 stall. how much would you say that will drop my et?

[Mark #2]

okay i just buight a FTVB and a 2400 stall. how much would you say that will drop my et? It will increase your ET, you are already spinning.

[TXLIGHTNING]

It will increase your ET, you are already spinning. Do you still have a stock tranny? BTW, were you running slicks on that run? If so, what size?

[nateusmcsvt]

i do now but im going to build it when i install the ftvb and the stall. i just need to get a better sprag and high performance clutch kit i guess, im still kinda learning on what is needed to rebuild a trans.

[nateusmcsvt]

Do you still have a stock tranny? BTW, were you running slicks on that run? If so, what size?

no slick just 305 nittos