PDA

View Full Version : Loud-Mouth exhaust this Friday?



my2002lightning
09-09-2003, 06:53 PM
Terry,

I'm working OT at work and am taking off Friday at lunch to head down to your shop.

Is Friday afternoon do-able for your exhaust guy?

Thanks,

Ronald

tliss
09-09-2003, 08:09 PM
You go, Ronald!

I should get a commission for this one!

Tom

my2002lightning
09-09-2003, 10:00 PM
You go, Ronald!

I should get a commission for this one!

Tom

Masta' Tom,
I have only you to blame! :hammer::D
Commission? You don't need not steenkin' commission! :nana2

Ronald

redlight02
09-09-2003, 10:32 PM
You will love the Loud Mouth. Now that its summer(well almost over now) I just love ripping by folks on thier cells whil in the car. Plus i use it as an alarm when i leave for work in the mornings. Wakes up the whole neighborhood :tu:

L8 APEX
09-10-2003, 12:50 AM
I will do some begging for you as this week is booked up:hammer: I will holler back asap.:tu:

my2002lightning
09-10-2003, 06:53 PM
Terry,

Any word on your exhaust guy's availability on Friday?

Thanks,

Ronald


redlight02,

I KNOW ! I KNOW ! http://www.ls1.com/forums/images/smilies/yup.gif

tliss
09-10-2003, 08:24 PM
Terry,

Any word on your exhaust guy's availibility on Friday?

Thanks,

Ronald


redlight02,

I KNOW ! I KNOW ! http://www.ls1.com/forums/images/smilies/yup.gif

Ronald,

Maybe I'll run down with you when you go and Terry can put the heat exchanger on my truck while your exhaust is being done. I'll keep an eye out as to when you're going and will see if I can go too.

Tom

my2002lightning
09-10-2003, 08:50 PM
Quote: <HR SIZE=1>Originally Posted by my2002lightning
Terry,

Any word on your exhaust guy's availibility on Friday?

Thanks,

Ronald


redlight02,

I KNOW ! I KNOW ! http://www.ls1.com/forums/images/smilies/yup.gif <HR SIZE=1>
Ronald,

Maybe I'll run down with you when you go and Terry can put the heat exchanger on my truck while your exhaust is being done. I'll keep an eye out as to when you're going and will see if I can go too.

Tom

Tom,

Now, I'm not driving slow so you can keep up w/me! http://www.ls1.com/forums/images/smilies/lmao.gif

Let's go!

Terry,

Hook a brotha' up if at ALL possible, please. http://www.ls1.com/forums/images/smilies/worshippy.gif

Ronald

L8 APEX
09-10-2003, 10:18 PM
Tom, I don't have the exchanger yet bud. Wasn't sure on your status. Ron Jr. Your exhaust is on the shelf ready for Friday. Give me a time range to expect you:tu:

my2002lightning
09-10-2003, 10:39 PM
Tom, I don't have the exchanger yet bud. Wasn't sure on your status. Ron Jr. Your exhaust is on the shelf ready for Friday. Give me a time range to expect you:tu:Terry,

Yes, to make sure, I would like Tom's exact exhaust. Nice rumble, but a loud mofo under WOT.

Either way, I'll be leaving Plano 12-ish on Friday and hauling-a$$ your way.

What's the best way to get a hold of you? Your url's business # or a cell #? Thanks.

Tom,

We can roll on down to Terry's shop in-tandem Friday if Terry can procure said heat-exchanger part... or you can ride with Laney and I and you can discuss H/E matters in person w/Terry. Either way.

If that's the case, you can have my enclosed garage for your rig while we run down to Terry's.

Aw, h#ll... take Friday afternoon off either way!

Let us know.

Yeehaw!:nana2:D

Ronald

tliss
09-11-2003, 06:15 AM
I'm trying to take Monday off, so Friday afternoon is a :nono: for me. Have fun.

Terry, keep me posted. I'm getting the heat exchanger, I just need to figure out the financials.

Tom

my2002lightning
09-11-2003, 07:15 PM
Terry,

I've been mousing around your redesigned website today and I haven't found your location info.

You might also include that on your website, also for customers. Just an idea.

Thanks and I'll be headed your direction noonish tomorrow between 12-1pm.

Also, do you accept personal checks ?

Thanks!:nana2


Ronald

L8 APEX
09-11-2003, 10:58 PM
The location of the Evil Lab is a well guarded secret. Personal checks from someone with an OK license and Ohio plates:hammer: The TALON Sgt at Arms collects on bad checks. It comes down something like this.
http://www.ci.temple.tx.us/police/graphics/swat/swat1.jpg

my2002lightning
09-11-2003, 11:48 PM
I've got your "20" triangulated via yahoo, Cupcake! :D

Personal check/US currency/yen/pesos ... either way, name your method of pmt. It's all good! :nana2

Regarding my "dual citizenship" status, that's my 2nd task of the afternoon is to haul-#ss back to Plano and to TDPS to become a "citizen" of Tejas.

BTW, if you see a 330/OH area code calling tomorrow, it's me. :D

Looking at getting BOTH cells switched as well.

Gotta' love Germans and their penchant/obsession for fine engineering!

http://www.streetpro.com/usp/images/hkmp5sd.jpg

blueoval01
09-12-2003, 12:08 AM
....... Gotta' love Germans and their penchant/obsession for fine engineering!
Humm, OK

L8 APEX
09-12-2003, 12:09 AM
MP5-SD what a sexy b#tch:bows I am going to have sweet dreams tonight. I saw a saying one time many years ago. "Happiness is a warm machine gun". But Happiness can also be a supressed sub-machine gun:banana:

my2002lightning
09-12-2003, 12:20 AM
The location of the Evil Lab is a well guarded secret. Personal checks from someone with an OK license and Ohio plates:hammer: The TALON Sgt at Arms collects on bad checks. It comes down something like this.
http://www.ci.temple.tx.us/police/graphics/swat/swat1.jpg

Terry/Brian,

Now that I take a second look, my next question is what is the squad/unit sniper doing "sweeping" his guys on his left? :hammer::nono:

Not good.

Ronald

my2002lightning
09-12-2003, 12:36 AM
Quote: <HR SIZE=1>Originally Posted by my2002lightning
....... Gotta' love Germans and their penchant/obsession for fine engineering! <HR SIZE=1>
I don't ....

BO'01,

Explain your "reservations" as to Germain engineering, etc. I'm curious.

Referring to firearms or autos ?

Ronald

ThunderBolt
09-20-2003, 11:39 PM
What is this "Loud mouth exhaust" you speak of?
i never heard of it. I had a loud mouth exhaust on
my SLP Comp T/A #77.
Is that wat you're referring to?

L8 APEX
09-20-2003, 11:42 PM
It is a sytem I build for my customers. It started as a PR BigMouth Exhaust but the terms get mixed after a few :beer: Call it what you want it's all good:tu:

my2002lightning
09-21-2003, 09:46 AM
Ron,

Yes, it's all the same exhaust system. Loud-Mouth...Big-Mouth.

A number of us are running it. Tom's another I know for sure.

Basically, it has the "big-block" exhaust rumble - Laney says it shakes the upstairs hall door on startup! :) and has a pretty good "drone" at speed. Those BIG chromy exhaust tips certainly fill-up the outlet and really set-off the appearance!

If you make it to a TALON meet or LFest, I can show it to you.

I like the setup and would do it again.:burnout:

Ronald

ThunderBolt
09-21-2003, 10:19 AM
I'm currently running Basanni shorty headers,Y-pipe w/
high-flow cats, Basanni exhaust w/ X-pipe.
It sounds pretty damn good.
If this Big-mouth exhaust is louder than my existing
set-up I might be interested in making that my next mod.
My Innovation Pro-sport tonneau is on order and might need
a few weeks to recover from that purchase.
That puppy is setting me back $1,100.00

I definitly want to listen to it though.
BTW. What's the cost for the exhaust?
I'll have to see if any HALO members might have it.

dboat
09-21-2003, 11:13 AM
I'm currently running Basanni shorty headers,Y-pipe w/
high-flow cats, Basanni exhaust w/ X-pipe.
It sounds pretty damn good.
If this Big-mouth exhaust is louder than my existing
set-up I might be interested in making that my next mod.
My Innovation Pro-sport tonneau is on order and might need
a few weeks to recover from that purchase.
That puppy is setting me back $1,100.00

I definitly want to listen to it though.
BTW. What's the cost for the exhaust?
I'll have to see if any HALO members might have it.

you might check with Wayne,aka, Andy_Cain.. he has the same setup and went for the mod of Terry's system.. drop him a PM..

ThunderBolt
09-21-2003, 08:30 PM
Ron,

Yes, it's all the same exhaust system. Loud-Mouth...Big-Mouth.

A number of us are running it. Tom's another I know for sure.

Basically, it has the "big-block" exhaust rumble - Laney says it shakes the upstairs hall door on startup! :) and has a pretty good "drone" at speed. Those BIG chromy exhaust tips certainly fill-up the outlet and really set-off the appearance!

If you make it to a TALON meet or LFest, I can show it to you.

I like the setup and would do it again.:burnout:

Ronald

Can't make it. Lets see some pics! :banana:

L8 APEX
09-21-2003, 09:58 PM
Your system with Bassani hi flows and mufflers are the most commonly liked sound you can get in loud. My wild system with hi flows is more on the side of uncivilized:evil Oh yeah, Bassani cats are queer, small, with crappy heat shields (turrets momment).

ThunderBolt
09-22-2003, 09:53 AM
Your system with Bassani hi flows and mufflers are the most commonly liked sound you can get in loud. My wild system with hi flows is more on the side of uncivilized:evil Oh yeah, Bassani cats are queer, small, with crappy heat shields (turrets momment).

I would assume they're street legal? Whenever you get a chance
Terry 'd like to see a couple of pictures of exhaust tips & exhaust
installed, And how much for the package?

my2002lightning
09-22-2003, 10:06 AM
Can't make it. Lets see some pics! :banana:

Let me get home this evening, take a few .jpegs with a little Mother's on there and I'll post up.

ThunderBolt
09-22-2003, 03:38 PM
Let me get home this evening, take a few .jpegs with a little Mother's on there and I'll post up.

Cool. Can someone give me a round about figure on cost please.

andy_cain
09-22-2003, 03:51 PM
I have the Bassani shorty headers and x-pipe cat back with PR high flow cats in between....Sounds great.
:burnout: :burnout:

L8 APEX
09-22-2003, 05:12 PM
The cat back is 350 installed, and stainless polished high flows are 300 installed. You can see pics on My Website (http://performanceresearchonline.com/street/svt/exhaust.htm)

Sixpipes
09-22-2003, 05:27 PM
http://www.talonclub.com/4images/data/media/8/aaa.JPG

Picture

http://www.talonclub.com/4images/details.php?image_id=1139

Sound is a little muffled, but you get the idea. :cool:

dboat
09-22-2003, 06:00 PM
http://www.talonclub.com/forum/showthread.php?threadid=3036


try this link..
Dana

my2002lightning
09-22-2003, 07:43 PM
Ron,

Here are a few .jpgs I just took.

http://www.f150online.com/galleries/images/2536-3926-70698.jpg

http://www.f150online.com/galleries/images/2536-3926-70699.jpg

It was getting a little late/dark, so you don't see some of the detail, etc.

If you want a GOOD, solid exhaust piece for your L that's "healthy" sounding, done-right with NO perceived HP/TQ loss, this is your setup.:tu:

Ronald

I would've tried to take an .mpg of a startup and a few good revs for you, but Laney was busy upstairs.

It definitely has a good rumble to it.

blueoval01
09-22-2003, 08:18 PM
hehehehahaha ..... my 3" tips have MAGNAFLOW Perforance engraved on the top .......... :banana:

Wayne, if you don't have "Tip envy" yet, you do now. :D

my2002lightning
09-22-2003, 08:59 PM
hehehehahaha ..... my 3" tips have MAGNAFLOW Perforance engraved on the top .......... :banana:

Wayne, if you don't have "Tip envy" yet, you do now. :D

Yep! I'm sure that engraving is good for a few 1/10ths in the 1/4! :rolleyes::D

I'm going for the "stealth" look... or something. :d

ThunderBolt
09-22-2003, 09:09 PM
Thanks fellas for all the feed back. I think I need an Unruly Big-mouth
exhaust! :D

my2002lightning
09-22-2003, 09:21 PM
Thanks fellas for all the feed back. I think I need an Unruly Big-mouth
exhaust! :D

As Larry the Cable-Guy says... "Git' 'er done!":burnout:

blueoval01
09-22-2003, 09:40 PM
Yep! I'm sure that engraving is good for a few 1/10ths in the 1/4! :rolleyes::D

I'm going for the "stealth" look... or something. :d
Ahhhhh, do I perceive "Tip envy" from Ronald as well? :nana2

my2002lightning
09-22-2003, 09:54 PM
Ahhhhh, do I perceive "Tip envy" from Ronald as well? :nana2

There's only one way to find out which is faster! Engraving v. "vergen". :D

L8 APEX
09-22-2003, 10:05 PM
Don't worry about Mark, even the laser etching can't make up for the 1/2" in diameter. We all have 3.5" tips mirror chrome:cool:

blueoval01
09-23-2003, 09:49 AM
Don't worry about Mark, even the laser etching can't make up for the 1/2" in diameter. We all have 3.5" tips mirror chrome:cool:
:rll: That's what I get for trying to read a tape after too many :beer:

redlight02
09-29-2003, 10:06 PM
So Ronald where have you been keeping yourself? Been ridin around Plano looking for another Red L with the loudmouth exhaust so we could run down the road and see if we can break any decibel laws

Bryan

my2002lightning
09-29-2003, 10:21 PM
So Ronald where have you been keeping yourself? Been ridin around Plano looking for another Red L with the loudmouth exhaust so we could run down the road and see if we can break any decibel laws

Bryan

I've been working a fair bit of OT at work and just got back from LFest!

Make plans for the TALON meet this Thur. and we can run over there in-tandem.

I'll tell you that ~16 hours of the LoudMouth gets OLD at speed... but in a good-way! :D:nana2

Ronald