PDA

View Full Version : upper pulley change


microsuck
11-02-2003, 10:46 AM
does anyone have the tool to change the blower (upper) pulley? I think I will put on a 2.93 and feel like doing it right. they are about $120 and i would rather rent one for like $30 than buy one.
Andrew
L8 APEX
11-02-2003, 11:35 AM
You already have a 2.93:hammer: :rll:
microsuck
11-02-2003, 12:51 PM
You already have a 2.93:hammer: :rll:i thought stock was a 3.00. O wait, thats the cobra, poopie! okay, the next smaller one. 2.85 or something?
Andre
L8 APEX
11-02-2003, 08:03 PM
If you are complaining about slippage on on stock upper a smaller one will make it worse. Sounds like you need one of those fancy idler setups. The next smaller is a 2.80 2/3psi depending on the lower.
microsuck
11-02-2003, 10:36 PM
If you are complaining about slippage on on stock upper a smaller one will make it worse. Sounds like you need one of those fancy idler setups. The next smaller is a 2.80 2/3psi depending on the lower.yeah, i bought one of those idler getups yesterday. i am just going to keep the stock upper. I will see how much i get back my the idler and then if I still ned more I will just put an 8# on the bottom.
Andrew