J.D. Blackwell
11-05-2003, 01:16 PM
OK, I will get more money back if I part my truck out so here I go....
3 guage full pillar w/ boost, elect. water temp, and elect. fuel pressure guages for $275
Almost new set of Rancho bars that are charcoal grey for $250
Accufab throttle body that is almost new for $300 + your stock one.
Factory Eaton blower w/ upper plenum. Has only 5,000 miles on it and never been overspun. $500 P.S. Has 2 red stripes on the upper plenum. Can be taken off though.
JDM "Built" shortblock w/ Manley rods and pistons, ARP main studs, ARP head studs, ported and polished heads w/ 3 angle valve job, Manley valves, Stage 2 crower cams (262dur .580lift 112lobe), lower intake is a '01+ that has been port matched and polished to the intake runners on the heads, the exhaust ports on the heads have been opened to match longtube headers, Synthetic since new, changed at 2,000 miles, right now 3,800 miles on it now and counting........
Couple conditions, I need your motor in trade (need to know miles) and you will have to pay for the complete swap. Now, I will make a good deal on the motor if anyone wants it since they are paying for the swap and I am getting your motor. I would like to have a motor with under 23,000 miles on it. If you want to keep your blower thats fine. My blower has about 4,000-5,000 miles on it with a 10# pulley. Anyone interested e-mail me.. JBlackwell69@aol.com
Will have a few more things to come soon. Probably MTX thunderform box loaded, amp, etc.....
Already sold my built tranny, nitrous, QA1 shocks, JDM full exhaust, and stall converter.
3 guage full pillar w/ boost, elect. water temp, and elect. fuel pressure guages for $275
Almost new set of Rancho bars that are charcoal grey for $250
Accufab throttle body that is almost new for $300 + your stock one.
Factory Eaton blower w/ upper plenum. Has only 5,000 miles on it and never been overspun. $500 P.S. Has 2 red stripes on the upper plenum. Can be taken off though.
JDM "Built" shortblock w/ Manley rods and pistons, ARP main studs, ARP head studs, ported and polished heads w/ 3 angle valve job, Manley valves, Stage 2 crower cams (262dur .580lift 112lobe), lower intake is a '01+ that has been port matched and polished to the intake runners on the heads, the exhaust ports on the heads have been opened to match longtube headers, Synthetic since new, changed at 2,000 miles, right now 3,800 miles on it now and counting........
Couple conditions, I need your motor in trade (need to know miles) and you will have to pay for the complete swap. Now, I will make a good deal on the motor if anyone wants it since they are paying for the swap and I am getting your motor. I would like to have a motor with under 23,000 miles on it. If you want to keep your blower thats fine. My blower has about 4,000-5,000 miles on it with a 10# pulley. Anyone interested e-mail me.. JBlackwell69@aol.com
Will have a few more things to come soon. Probably MTX thunderform box loaded, amp, etc.....
Already sold my built tranny, nitrous, QA1 shocks, JDM full exhaust, and stall converter.