PDA

View Full Version : Dyno Results



scott015
01-09-2004, 03:35 PM
4lb Pully
90 Mass Air
JL Ram Air
PSP Autologic Chip

Best HP: 388.2
Best Torque: 487.5

ill post pics of the printout in a second.. let me scan them....

scott015
01-09-2004, 03:45 PM
here are my 2 best runs.... take a look and let me know what yall think about my A/F ratio... looks to start out at 15 then levels out at around 11.5 - 12


http://www.awardsandbeyond.com/dyno1.jpg

PoorSvtman
01-09-2004, 03:55 PM
Man i need to go get mine done real bad. I want to see where i stand. How much is it again?

scott015
01-09-2004, 03:56 PM
$45 for 3 pulls

scott015
01-09-2004, 04:17 PM
hows my #s for my mods? before I went in i was hoping for 390hp and I got 388 so i was satisfied.... am I pretty much on key for my mods?

SILVER2000SVT
01-09-2004, 05:13 PM
Scott, you match me pretty close for the same mods. 386rwhp and 476ftlbs.


Jason

STEALTH02
01-09-2004, 10:10 PM
I got my truck dynoed today too and here is the best I got with my mods:

Street side
393.1 HP/491.5 TQ------air fuel 12-12.5

mods:

6lb pulley
JDM flipchip
E-fan
LT's
High flow cats/Bassani exhaust
JDM cold air

I feel I should be hitting 400/500 with my mods. I've seen a few other people with the same mods put down more like 405-410 HP.

scott015
01-10-2004, 09:19 AM
i posted my #s up on svtperformance, nloc and f150online and it seems very consistant that everyone thinks my numbers are low for my mods.... could this be true? does that mean speedworks dyno is off a little or does it mean something about my truck? maybe i should get the chip reburned?

bobbywade69
01-10-2004, 09:22 AM
The #'s are good, its probley because the programs are a little on the safe side so your not pushing it as hard as others are, most race programs require race gas, yours probley doesn't so less timing ,thats why your #'s are a little low, but they look good to me!:tu:

TX SVT LIGHTNING
01-10-2004, 09:38 PM
On a rainy day on street side my '01 pulled 401rwhp & 475rwtq with:
4lb, chip, cone filter, t-body, e-fan kit & magnaflow muffler (12.29 @ 110.55)

Stock it did 329rwhp & 402rwtq (13.51 @ 102.33)

PoorSvtman
01-11-2004, 10:23 PM
On a rainy day on street side my '01 pulled 401rwhp & 475rwtq with:
4lb, chip, cone filter, t-body, e-fan kit & magnaflow muffler (12.29 @ 110.55)

Stock it did 329rwhp & 402rwtq (13.51 @ 102.33)

Scotts truck is a 00 so it has less hp stock than your 01 and each truck responds to mods differently.

His numbers look good. Since he says he dosent want to race it like most of us do i would touch anything.

As for me beating him with only exhaust,2lb and intake my truck must be realy loose with the 73k miles or like steve says it because its a 99 :burnout: