PDA

View Full Version : Midnight Madness Sale!


L8 APEX
02-05-2004, 12:51 AM
I had a few things to clear out. Hopefully it will help someone needing mods on a budget:tu:
5) Ford Motorsport drop kit front springs 1.5" rear shackles 2" $150.
6) Extrude honed upper plenum ceramic coated $150.
7) Flip chip 99-02L or 02-03HD's any standard files $275.
8) 2# lower pulley 01-up $80 bucks
Band
02-05-2004, 01:02 AM
I'll take the beltech drop shackles... You gonna be at the meeting tomorrow?
L8 APEX
02-05-2004, 09:13 AM
I'll try and remember them.
StormShadow
02-06-2004, 08:35 PM
I had a few things to clear out. Hopefully it will help someone needing mods on a budget:tu:
1) 12" filter kit new in box $165 No tax, no shipping, no hassle.
2) Ford Motorsport 1"front 2" rear lower kit new $160, $280 installed.
3) Heat Exchanger new in box $390.
4) 4701 I believe pro comp boost gauge (silver face) $15 bucks.
5)BelTech drop shackles 2" new $60 bucks.
6) Extrude honed upper plenum ceramic coated $175.
7) Flip chip 99-02L or 02-03HD's any standard files $300.
No 3, is that the Fluidyne unit?
True Blue Aggie
02-06-2004, 09:28 PM
What is the difference between No.2 and No.5 as far as the final outcome. I have heard of both products, and I am figuring that both drop the rear 2". Or am I completely wrong?
L1nt2B
02-06-2004, 10:30 PM
Im game for the plenum
L8 APEX
02-06-2004, 11:08 PM
What is the difference between No.2 and No.5 as far as the final outcome. I have heard of both products, and I am figuring that both drop the rear 2". Or am I completely wrong?Shackles are rear 2" only, the Motorsport kit include front springs as well.
L8 APEX
02-06-2004, 11:09 PM
Im game for the plenumCome get it I will be at the shop tomorrow.
L8 APEX
02-06-2004, 11:10 PM
No 3, is that the Fluidyne unit?No, same specs just made by a local race shop.
L8 APEX
02-09-2004, 10:42 AM
Nothing sold yet, come get it people:hammer: .
tliss
02-12-2004, 10:23 AM
Mark that exchanger gone! :nana2

Tom
L8 APEX
02-25-2004, 11:03 PM
Updated List:tu:
StormShadow
02-25-2004, 11:28 PM
Is the upper plenum ported?
L8 APEX
02-25-2004, 11:31 PM
You would have to look at a stock one for sure. It is so smooth spit accelerates through it:eek2:
03LightningRocks
02-25-2004, 11:58 PM
Terry,


Is that lower pulley for an interchangeable hub? Will it bolt to my metco hub?


Thanks
Ron
L8 APEX
02-26-2004, 09:47 AM
No Dad, it is just a fixed pulley.
03LightningRocks
02-26-2004, 07:42 PM
No Dad, it is just a fixed pulley.

Thanks.........................SMART ASS!!!!
blueoval01
02-26-2004, 09:06 PM
Thanks.........................SMART ASS!!!! Eh, don't feel bad, Ron. He calls me "pops". :rolleyes:
03LightningRocks
02-26-2004, 10:48 PM
Eh, don't feel bad, Ron. He calls me "pops". :rolleyes:

Maybe "dad" isn't so bad after all....:d .

Tell you what, I will drive to Duncanville and take my belt to the young whipper snapper for both of us. He'll start calling us Sir from then on out.


Rocks
StormShadow
02-26-2004, 11:27 PM
Can you post a pic of the Intake?
L8 APEX
02-26-2004, 11:32 PM
Can you post a pic of those girls today:eek2: :bows . Come by and look at it yourself lazy ass.
03LightningRocks
02-26-2004, 11:39 PM
Can you post a pic of those girls today:eek2: :bows . Come by and look at it yourself lazy ass.

Wow Terry......can I borrow that sales technique to put in my book?



Rocks
L8 APEX
02-26-2004, 11:41 PM
Some things you just can't teach. :evil
03LightningRocks
02-26-2004, 11:54 PM
Some things you just can't teach. :evil
Your right about that....:d .

Now, let me teach you something..........

I...(the potential customer), expressed a need(2lb lower for my metco hub). The number one answer may be..."No, Blow it out your Arse", as you gave me. But the secondary answer could be...."Unfortunately not, but I can probably get you one for x number of dollars within x time frame. Would you like me to order you one?"

What cha think??? I realize of course it is hard to compete with the number one answer...but number two isn't bad.


Rocks:beer:
L8 APEX
02-27-2004, 12:10 AM
You sound like my future ex wife wanting me to read your mind and ****:bs . You asked what type it was and I answered your question. You didn't ask for a metco ring dill hole. Don't hold it against me that I didn't read your mind honey:D
03LightningRocks
02-27-2004, 12:14 AM
Some things you just can't teach. :evil

:evil
03LightningRocks
02-27-2004, 12:27 AM
I don't want to be accused of making you thimk....so I better tell you, I also need an 8lb lower....it should be a 9.5 inch. My 6lb lower is 9" on the rim. My 4lb is 8 3/8 on the rim.



edit...I received your P.M. and sent a response...Thanks

Rocks:tu:
ND4SPD
02-28-2004, 01:47 AM
What's the cost for install and the kit Ford Motorsport drop kit front springs 1.5" rear shackles 2", I'm looking at getting as much as I can while I'm down there. I also want to get my dyno and the magna flow wild muffler put on. Question about that, I have a borla cat back and I hate it, so do you just cut the borla muffler off and put the magnaflow in it's place or does it have to be the full cat back. So anyways what at I'm lookin at for cost for it all. Do you also carry the 4lb pulley? Thanks!! :D
L8 APEX
02-28-2004, 11:07 AM
I usually have some pulleys in stock right now I have 2,4, and 6# in stock. We can look and see but my system takes most of the cat back space. Drop kit is 120 install.
Nuhklz
02-28-2004, 01:14 PM
You sound like my future ex wife wanting me to read your mind and ****:bs . You asked what type it was and I answered your question. You didn't ask for a metco ring dill hole. Don't hold it against me that I didn't read your mind honey:D
Maybe that's why you're still hanging out at malls, junior highs and WH?

Like you said, some things just can't be taught :hammer:
my2002lightning
02-29-2004, 02:01 AM
This all reminds me of the line from Cool Hand Luke.

"What we have here....is...a failure to communicate."
03LightningRocks
02-29-2004, 11:33 AM
This all reminds me of the line from Cool Hand Luke.

"What we have here....is...a failure to communicate."

Is that your dirt in my hole???
ND4SPD
02-29-2004, 03:02 PM
I usually have some pulleys in stock right now I have 2,4, and 6# in stock. We can look and see but my system takes most of the cat back space. Drop kit is 120 install.

If all goes to plan, I'll be up there to get the drop done and gthe dyno, I'll guess and see with the cat back, whats the cost for the magnaflow wild catback itself not installed.
L8 APEX
02-29-2004, 09:53 PM
I build the system on the truck it is not a carry out system. Just plan with me ahead of time.
my2002lightning
02-29-2004, 11:08 PM
Is that your dirt in my hole???
Ron,

You have to love the old school classics ...

Paul,
Welcome to TALON and it's good to see another L going the PR Big-Mouth route. :beer:

Ronald
ND4SPD
03-01-2004, 12:15 AM
I build the system on the truck it is not a carry out system. Just plan with me ahead of time.

will do...
Smokey01
03-01-2004, 08:55 PM
I had a few things to clear out. Hopefully it will help someone needing mods on a budget:tu:
5) Ford Motorsport drop kit front springs 1.5" rear shackles 2" $150.
6) Extrude honed upper plenum ceramic coated $150.
7) Flip chip 99-02L or 02-03HD's any standard files $275.
8) 2# lower pulley 01-up $80 bucks
If you still have the drop kit, Ill take it. Let me know asap. And if you do what would you charge to install ? PS Thanks for great work the truck is runing great can't wait to take it to track and see if i can get in the 12s. :nana2
L8 APEX
03-02-2004, 01:18 AM
Yeah I still have the kit.
ND4SPD
03-02-2004, 02:31 AM
Terry, I will for sure be coming up this Sat to get dynoed, maybe a new tune on my chip, the magnaflow "wild" system, a 4lb pulley and if money permits the drop kit - if you still have any. Also do you carry any spark plugs. I'll call you and let you know when to expect me. Thanks

Paul