Speedworks Dyno Sat 03/27

[StormShadow]

Me and Ron and Jeff are going to Speedworks Sat for a dyno. Anyone that wants to go post up. I'll be calling Speedworks tomorrow to reserve my spot.

[PoorSvtman]

Im out on this. Ill be repacking my front wheel bearings, changing oil, checking to see how good my plugs look and to make sure there tight and might look at the drives side leaking header. But ill probly pass on the header gasket because im lazy.


So if any one needs to borrow a garage or wants to come over ill be in the garage for the most part of the morning till around noon.


Might wash and wax the L again so the paint will be slick if i run on sunday

[bobbywade69]

I might stop by your crib Sat Mike if I have some time I need a coat of wax on tha L!:D




Im out on this. Ill be repacking my front wheel bearings, changing oil, checking to see how good my plugs look and to make sure there tight and might look at the drives side leaking header. But ill probly pass on the header gasket because im lazy.


So if any one needs to borrow a garage or wants to come over ill be in the garage for the most part of the morning till around noon.


Might wash and wax the L again so the paint will be slick if i run on sunday

[PoorSvtman]

Bring it bobby. I got enough wax. Im buying some new bonnets for my waxer when i go get my oil saturday.

If i end up washing the L ill probly be out there all day. The inside needs to be cleaned pretty bad. Theres alot of crap behind the seats

[bobbywade69]

I'll try to but I'm really booked up Sat! But I will try to stop by!knana




Bring it bobby. I got enough wax. Im buying some new bonnets for my waxer when i go get my oil saturday.

If i end up washing the L ill probly be out there all day. The inside needs to be cleaned pretty bad. Theres alot of crap behind the seats

[Band]

I was planning to get my dyno done mid this week and have my new tune by Sat, but don't have my LT's on yet. So, I'll prolly be down for a dyno on Sat. It may determine if I can run sunday or not.

[03LightningRocks]

I was planning to get my dyno done mid this week and have my new tune by Sat, but don't have my LT's on yet. So, I'll prolly be down for a dyno on Sat. It may determine if I can run sunday or not.

Don't even think it Sayle....your running Sunday:tongue: .


Rocks:nana2

[02BOLT]

I was planning to get my dyno done mid this week and have my new tune by Sat, but don't have my LT's on yet. So, I'll prolly be down for a dyno on Sat. It may determine if I can run sunday or not.

Sayle,
You should be fine to run with the long tubes EVEN if your new tune isn't here in time. If anything the long tubes should richen her up a tad. The new tune is primarily to account for the O2 sensors being moved downstream. The truck should run JUST FINE. The "new" tune will simply enable her to run just a little better.:tu:

Later Amigo,
Rob

[L1nt2B]

where is speedworks? maybe I will drop by and hang out for a bit. are they doing a air fule reading? How much?

[tliss]

where is speedworks? maybe I will drop by and hang out for a bit. are they doing a air fule reading? How much?
They do the A/F with the sniffer in the tailpipe. Located off of 121 in Lewisville:

http://www.txspeedworks.com I think....

Last dyno I did was $45 for three pulls.

Tom

[scott015]

i should get my new programmed flip chip back from PSP on Friday... what time u guys meeting up there on Saturday? Ill try and make it if I can....

[Mark #2]

Sayle,
You should be fine to run with the long tubes EVEN if your new tune isn't here in time. If anything the long tubes should richen her up a tad. The new tune is primarily to account for the O2 sensors being moved downstream. The truck should run JUST FINE. The "new" tune will simply enable her to run just a little better.:tu:

Later Amigo,
Rob
Rob,
Really, long tubes will richen it up? I would think just the opposite due to increased scavenging.
Mark

[roebigbro]

I'd like to say Hello. :) This thread was posted on the NHTOC site, by a TALON member. A few Harley Truck owners including myself will try and attend this event. I'd like to meet other Ford owners, see some of your trucks and the different Mod's.

Chris...

[Silver03HD]

I'd like to say Hello. :) This thread was posted on the NHTOC site, by a TALON member. A few Harley Truck owners including myself will try and attend this event. I'd like to meet other Ford owners, see some of your trucks and the different Mod's.

Chris...

That is if you guys don't mind us coming over there. Do any of you know if we have to make an appointment or do we just show up?

[Band]

That is if you guys don't mind us coming over there. Do any of you know if we have to make an appointment or do we just show up?


Speedworks is first come, first serve on Saturdays... During the week you need an appointment...

[03LightningRocks]

Rob,
Really, long tubes will richen it up? I would think just the opposite due to increased scavenging.
Mark

That's kind of what I thought also. On mine the long tubes caused it to lean out a hair. It raised it from 11.6 to 11.8ish.


Rocks:beer:

[scott015]

im gonna try and get there tomorrow so i can jump into the 400hp club on my street program....

what time u guys gonna be there??? im thinking of either being there at 10 or later like 2

[03LightningRocks]

Chris,


How about you and Elliot,( and any other Harley Owners that might be interested), come out to Ennis Sunday morning and run with the Talon guys. It is bracket racing and we could sure use some more drivers.


Rocks:beer:

[Band]

Would be cool, somebody's gotta represent the HD....

[03'svtlight]

BTW, Band, its me and you in the first round of qualifying bubba. I wanna see if those longtubes can walk the walk as much as they talk the talk. :cool:

[Band]

Aight, sounds good.. Depending on the weather, I should have a good idea after the dyno tomorrow, but won't have a tune for them till next week...

They do talk the talk lol :eek:

Think I saw you today about 6pm on Bowen...

[03'svtlight]

Aight, sounds good.. Depending on the weather, I should have a good idea after the dyno tomorrow, but won't have a tune for them till next week...

They do talk the talk lol :eek:

Think I saw you today about 6pm on Bowen...
Nope it wasn't me. I was at work all day :bs

[StormShadow]

I"m going first thing in the morning.

[roebigbro]

Chris,


How about you and Elliot,( and any other Harley Owners that might be interested), come out to Ennis Sunday morning and run with the Talon guys. It is bracket racing and we could sure use some more drivers.


Rocks:beer:

Thanks guy for the invite. Wish I could, got to help out with a birthday party. Also like to say I enjoyed meeting you guys. Great looking trucks.

Sayle, Do you have a web link to your diablo custom tuner?

Thanks,
Chris

[Band]

Yup!

http://www.powersurgeperformance.net/index.asp

His name is Sal.

You can search for his posts on http://www.f150online.com/forums/forumdisplay.php?s=&forumid=50

[Silver_2000]

I was running errands all day - If I had known you guys were dynoing I would have stopped by... I live 5 min from speed werks...
:hammer: :crying:
Doug