Here goes the goodies...........

[03'svtlight]

DIABLOSPORT Predator- $300.00

PERMA-COOL Dual electric fans (easy 3 wire hookup w/adj. thermostat
Cobra R water pump w/pulley and belt. (cost new $800.00) $350.00sold

"PR" custom built dual Borla catback w/x-pipe (true bolt-on) $250.00sold

Pro-M 95mm mass air -(flange-style, plug-n-play,no tuning nec.) (new $275)-$150.

ASP #4 Lower pulley w/belt $100.00

C&L Intake Elbow-$75.00sold

MAC 3 1/2qt deep tranny pan (best offer)

AIRAID-Air box w/filter $50.00

Autometer Phantom Series Gauges- EGT (pyro), Boost w/matching pillar $125.00sold

Chrome SVTLightnings receiver hitch cover-$15.00

[BC Lightning]

Just e-mail me with the info to get in contact with you and i'll take the elbow, electric fan and water pump.

[badsvt02]

just email me today at lpedraza@dallasisd.org and ill try to take as much as I can....i dont work tomorrow, so i can meet you somewhere tomorrow..... :banana: knana :nana2

[03'svtlight]

runnin' a BLUE LIGHT special on the remaining stuff. No reasonable offer refused.

[Silver_2000]

Chrome SVTLightnings receiver hitch cover-$15.00
If the hitch says SVTLightnings

Ill take it

[03'svtlight]

If the hitch says SVTLightnings

Ill take it
It does.......... Maybe (if he reads this) Sayle can drop it off to you today. I have to see him today and since you both live in Carrollton, it may work out. I'll put it in my car just in case you can reach him. :D

[badsvt02]

Pro-M 95mm mass air
ASP #4 Lower pulley w/belt
Chrome SVTLightnings receiver hitch cover
Im interested in these items, if you could email me at lpedraza@dallasisd.org with prices for these, or make me a deal for all three...... :banana: :banana:

[03'svtlight]

If the hitch says SVTLightnings

Ill take it
SVT w/Lightning "BOLT" :cool:

[03'svtlight]

Predator is back on the block. $300.00

[min150mph]

sent you a pm

[03'svtlight]

sent you a pm
right back atcha :D

[Tex Arcana]

Is the hitch cover still available?

[03'svtlight]

Is the hitch cover still available?
Doug called for it.... I guess I'll let him decide if he wants it or not.

[Silver_2000]

Doug called for it.... I guess I'll let him decide if he wants it or not.
Im not going to be back for a while - He can have it ..

Thanks for holding it for me though...

Doug

[L8 APEX]

That was originally Daivd's hitch cover on his 02 True blue:tu:

[03'svtlight]

I still have a few items I would like to move outta my garage before they get run over.

95mm pro-m meter
MAC 3 1/2 deep tranny pan
ASP #4 Lower pulley w/belt

I also have a VOLANT cold air system that seems to be really nice. About a month old, and I never had a chance to run it. First $175.00 gets it.
http://www.volantperformance.com/Products/vtrucklist_files/19954/19954.htm
Also some sweet Colorado Customs 20's if anyone has 94-96 Chevy Impala.

[Tex Arcana]

I still have a few items I would like to move outta my garage before they get run over.

95mm pro-m meter
MAC 3 1/2 deep tranny pan
ASP #4 Lower pulley w/belt

I also have a VOLANT cold air system that seems to be really nice. About a month old, and I never had a chance to run it. First $175.00 gets it.
http://www.volantperformance.com/Products/vtrucklist_files/19954/19954.htm
Also some sweet Colorado Customs 20's if anyone has 94-96 Chevy Impala.What's the possibilitiy of getting a look at the Volant sometime in the near future? And the hitch cover as well? I am still wanting that hitch cover, but I need to have a look at thte CAI before I pull the trigger on it.

[03'svtlight]

What's the possibilitiy of getting a look at the Volant sometime in the near future? And the hitch cover as well? I am still wanting that hitch cover, but I need to have a look at thte CAI before I pull the trigger on it.
sometime this week would be cool. did you check it out from the link I posted?? Its a pretty slick piece and it comes with an elbow. :cool:

[Tex Arcana]

sometime this week would be cool. did you check it out from the link I posted?? Its a pretty slick piece and it comes with an elbow. :cool:
Yeah, I did... and I've looked at that link before. I'm not finding anything so far that I like so far, as much as for real cold air induction as anything else. THere is no way I will use a so-called "CAI" if it doesn't draw actual cold air, and is sucking hot underhood air. :(

What's yer schedule? Or, just call me, send me a PM and I'll send you the number.

[UUDLOSE]

I still have a few items I would like to move outta my garage before they get run over.

95mm pro-m meter
MAC 3 1/2 deep tranny pan
ASP #4 Lower pulley w/belt

I also have a VOLANT cold air system that seems to be really nice. About a month old, and I never had a chance to run it. First $175.00 gets it.
http://www.volantperformance.com/Products/vtrucklist_files/19954/19954.htm
Also some sweet Colorado Customs 20's if anyone has 94-96 Chevy Impala.

I'd like to take the pulley and belt off your hands. Call me at 817-451-1443 and we can arrange a meet, if you still have it.

Mike

[03'svtlight]

I'd like to take the pulley and belt off your hands. Call me at 817-451-1443 and we can arrange a meet, if you still have it.

Mike
Sorry dude, someone beat ya' to it.

[03'svtlight]

Yeah, I did... and I've looked at that link before. I'm not finding anything so far that I like so far, as much as for real cold air induction as anything else. THere is no way I will use a so-called "CAI" if it doesn't draw actual cold air, and is sucking hot underhood air. :(

What's yer schedule? Or, just call me, send me a PM and I'll send you the number.
As far as the "cold-air" theory is concerned, I think they use the term losely. It is only as "cold" as the ambient temp. So if its 100 degrees out, well, so much for the cold air. Abit better than engine air IMO. But your more than welcome to check it out. My ride will be in the paint & body shop for the next three days so plan on mon. at the earliest.

[Tex Arcana]

As far as the "cold-air" theory is concerned, I think they use the term losely. It is only as "cold" as the ambient temp. So if its 100 degrees out, well, so much for the cold air. Abit better than engine air IMO. But your more than welcome to check it out. My ride will be in the paint & body shop for the next three days so plan on mon. at the earliest.
Monday, I hold down the fort at the wife's store, so am unavailable during the day, but will be availab e that night. Either that or Tuesday, you pick. ;)

[03'svtlight]

Monday, I hold down the fort at the wife's store, so am unavailable during the day, but will be availab e that night. Either that or Tuesday, you pick. ;)
This is what I have left:

pro-m 95mm meter $150.00 (nice)
MAC tranny pan $80.00
VOLANT air system $175.00
SVT chrome reciever cover $15.00

Lemme know what you most interested in and we can work out something. I had another guy who wanted ALL of it,(at least thats what I was told) No call back, no nothing. I guess thats the way it is when you want more than your wallet will allow, but at least have the balls to call and say there has been a change in plans. :bs so don't pull my leg on it , I don't have the time to be jerked around so if you want it we can make arrangements.

[Tex Arcana]

This is what I have left:

pro-m 95mm meter $150.00 (nice)
MAC tranny pan $80.00
VOLANT air system $175.00
SVT chrome reciever cover $15.00

Lemme know what you most interested in and we can work out something. I had another guy who wanted ALL of it,(at least thats what I was told) No call back, no nothing. I guess thats the way it is when you want more than your wallet will allow, but at least have the balls to call and say there has been a change in plans. :bs so don't pull my leg on it , I don't have the time to be jerked around so if you want it we can make arrangements.
I am extermely intersted in the hitch cover. I'm thinking about the Volant, and to be dead honest, I can't pull the trigger on it right now because I just dropped $600 on slicks and rims, and I'm unemployed. I try to do THAT, and I'll get shot; but I do want to have a good look at the volant. I'ts up to you, I'm not trying to jerk you over, jsut want to get a look at it. PM me if you're still interested in selling me the hitch cover.

[CowlSS]

I replied to your other ad about the Colorado Custom wheels. What model are they, and do you have any pics?

[03'svtlight]

I replied to your other ad about the Colorado Custom wheels. What model are they, and do you have any pics?
http://www.coloradocustom.com/Wheels.aspx?SeriesID=2&DivCat=6 It is the "arriba" model. The pic just does'nt do it very much justice. These wheels have close to a 4"-5" inch lip! :D

[03'svtlight]

I am extermely intersted in the hitch cover. I'm thinking about the Volant, and to be dead honest, I can't pull the trigger on it right now because I just dropped $600 on slicks and rims, and I'm unemployed. I try to do THAT, and I'll get shot; but I do want to have a good look at the volant. I'ts up to you, I'm not trying to jerk you over, jsut want to get a look at it. PM me if you're still interested in selling me the hitch cover.
Sorry bro :o but I think the VOLANT is sold. But I still have the hitch cover. I'm on Lovers Ln. & Central if you would like to swing by and get it. shoot me a PM if you wanna.

[Edward]

Is the tranny pan still available?

Thanks,
Edward

[LIGHTNUP]

Is the airaid still available?

[03'svtlight]

Is the tranny pan still available?

Thanks,
Edward
everything is gone

[03'svtlight]

Is the airaid still available?
everything is gone

[99WhiteBeast]

You're still welcome to hang with us anytime at the track Trai:tu:

[03'svtlight]

You're still welcome to hang with us anytime at the track Trai:tu:
Hey bro, I really appreciate the love. :beer: AND I will still hang with you guys.... There's a nice crowd amongst you guys (and girls), and its a cool deal. I live basically walking distance from "PR", so I try to go and kick Terry in the nuts just about every chance I get. Like I was telling Michael (True Blue Aggie) the other day, I got my I on an 01' stepside XLT thats hit slightly in the front. Its got a six banger in it so my plan would be to mix alittle old school with new school. Maybe a 351/408ci with some nice heads would be sweet. :D I just wanna make damn sure its a project I could finish and not be stuck with it half done.