wheel stud question?

[ken cryder]

does any one know if ARP makes a wheel stud for the lightnings . or any body else make one ? don't want to go back with the factory ones after bending four this weekend . thanks


ken

the other old guy;)

[L8 APEX]

2000 and up are 14mm X 2.0 thread. Not sure how they rate stud sizes on the shank.

[ken cryder]

2000 and up are 14mm X 2.0 thread. Not sure how they rate stud sizes on the shank.
terry you should know mines a 99 with 12mm studs . i was to lazy to go seaching and was curious if any body else had bought new hardened ones . this bending crap is for the birds.


ken

[L8 APEX]

12mm studs are sad:( Maybe you could drill the axle to fit 14's and replace the front rotors to 14mm stud rotors:tu: . I am sure there are studs available though.

[L8 APEX]

Here is the Summit Racing search (http://store.summitracing.com/default.asp?target=search.asp&type=bykeyword&searchtype=both&part=wheel+studs) Need to get the knurl measurement off the stock studs.

[ken cryder]

12mm studs are sad:( Maybe you could drill the axle to fit 14's and replace the front rotors to 14mm stud rotors:tu: . I am sure there are studs available though.
i agree with ya terry the 12s are sad .
thanks for the info i went to the ARP site but they didn't have a listing for them .

ken

[travis5000_99]

I got mine at Autozone & they worked like a charm !

[Ivanhoe_Farms]

try this link
http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=2932&prmenbr=361

Looks like the knurl is probably .625.:twitch: