Electric Fan Hook up

[BC Lightning]

Well i have the water pump on, the crank pulley, all the belts are on too. Now what wire do i tap the electric fan wire into? There are three wires, Pos. Neg and a blue acces. wire. Where does this blue wire go? Thanks for the help.
-Michael

[Alpine]

Well i have the water pump on, the crank pulley, all the belts are on too. Now what wire do i tap the electric fan wire into? There are three wires, Pos. Neg and a blue acces. wire. Where does this blue wire go? Thanks for the help.
-MichaelThe blue should be for the high speed on your fan. you can put a switch and supporting hardware under the engine compartment or a switch in the truck somewhere to turn on your fan for cool down at the track while the truck is off. The blue wire is not needed unless you want to use the high speed for that.

[L8 APEX]

I told you this Mike. Blue goes to your positive lead to the A/C compressor, Red to battery and black to chasis/batt ground:tu:

Guys, he has a cheese ball fan not the usual "fan kit":D

[BC Lightning]

It might be a cheese ball fan, but it works :D .