BIG thanks to Bobby

[00Bolt]

just wanted to say thanks again Bobby for bustin his arse on my truck yesterday from 9am - 9pm !!!!

i owe ya one!!!!


the truck is a BEAST now!!!!! knana

[L8 APEX]

I heard Adam is already trying to sell his truck before you kick his arse:eek: :rll:

[bobbywade69]

No problemo :tu:

[StormShadow]

Don't worry Terry. He will get the ass kicking of his life before I sell the Truck. This is my personal promise to you.:rll:

[StormShadow]

Kinda like what Rocks does to me everytime we race.

[00Bolt]

i think it will be fairly close....

so are you really selling the truck? what a coward

[Alpine]

i think it will be fairly close....

so are you really selling the truck? what a cowardLets see if you put down 470hp on the rollers tomorrow, then we will know if it is going to be close. I am guessing it wont be over 425. I hope it does but I dont think it will.

[00Bolt]

well i dont think I will be near 470.... im thinking I will be close to 430-440 but thats my street tune... i have yet to ever use my race tune or dyno it....

My best ever was 398 and that was before efan,regapped plugs,full exhaust, 2.8upper, idler, phenolic spacer, power plenum and accufab

who knows.... but i think 40hp from all that isnt asking too much do ya?

[Shiner1]

well i dont think I will be near 470.... im thinking I will be close to 430-440 but thats my street tune... i have yet to ever use my race tune or dyno it....

My best ever was 398 and that was before efan,regapped plugs,full exhaust, 2.8upper, idler, phenolic spacer, power plenum and accufab

who knows.... but i think 40hp from all that isnt asking too much do ya?
It will be interesting to see what your numbers are. I'm going to guess that you won't see 40 hp from those mods. Take into consideration the outside elements as well (temp/humid). Let us know.

[00Bolt]

ya i guess 40 might be a little over doing it.... but I would be happy to see 425-430

[00Bolt]

here is some of Bobbys work... I like the new engine BLING BLING....


2.8 Upper and Idler
http://www.svtgalleries.net/gallery/data/500/578DSC00744-med.JPG



Power Plenum
http://www.svtgalleries.net/gallery/data/500/578DSC00745-med.JPG



PhenolicSpacer
http://www.svtgalleries.net/gallery/data/500/578DSC00746-med.JPG

[PoorSvtman]

Im sorry but that plenum needs some help. It just looks cheap to me. In all the pics ive seen, the finish dosent look smooth at all and the pics dont help much. I dunno the factory one looks better.

[00Bolt]

ya i agree, its not pretty to look at.... but one of these days im gonna send the plenum, eaton, etc off and get everything chromed out.....

[Nuhklz]

ya i agree, its not pretty to look at.... but one of these days im gonna send the plenum, eaton, etc off and get everything chromed out.....
If you hit the numbers it will look prettier http://www.talonclub.com/forum/images/smilies/wink.gif

[bobbywade69]

Thats a clean ass install!!!:D

Much better after i got everything done, your exaust system was being a biatch had to cut the manifold studs off on the passanger side because Ford had rounded them off when installing the motor!! And then the Slowmaster exaust was welded in soo tight that I had to take one of the traction bars off and the crossmember!!! But after a lifted the motor up alittle it all slipped right in like it should and everything else went smoothly!!! Not bad doing it all in 7 1/2 hours with out a lift!!:tu: But i can tell u now that the L will be waking the cops up everytime u punch it it sounds like open headers well it almost is!!!:evil It all was good when I saw the green in my hand!!!:bows Well at least it sounds fast!!!:evil Now it needs to go fast!!!

[Sandman]

Hey Bobby,

Maybe you should think about becoming a supporting vendor!:rll:

[bobbywade69]

Yea Scott supported Vendor



Hey Bobby,

Maybe you should think about becoming a supporting vendor!:rll: