Preferred Auto Glass guy!

[L8 APEX]

I called my glass guy and he said $150 for gen1 or gen2.
$150 at my shop or 20 bucks extra to come to your location, somtimes he travels for free?
This is PPG glass no Mexico cracking cheap stuff. We have already done Adam and Mike's if you want a reference.
His name is Riley and his cell # is 214 288 2917. He can help with all of your auto glass needs and knows how to treat a Lightning.

[99WhiteBeast]

I'm in if he can he save the inspection and tag stickers?


If not I'll wait another 6 months

[BC Lightning]

put me down for the third person, I have some chips that are getting bigger

[Sixpipes]

How about Gen I glass? :cool:

[TP Derrick D]

Terry, I'm in, I 'm about to get a replacement done due to a 9-10" crack. I have my new registration sticker I'm holding off putting on until I replace the windshield first. How soon ? Auto Glass Plus is about a c-note higher.

[sonicbluetommy]

I am in too. My Missouri tags are up this month and I was about to have it replaced to get my Texas license. Of course, just last month I picked up a 2 inch crack that is now about 7 inches.

Do we get a better deal if 5 or 6 guys commit?


By the way do I have to have the sniffer test done on my truck since it is an 04?

[sonicbluetommy]

I'm thru there on business at least once a week so give me the address and you get my money.

[L8 APEX]

no sniffer. But when you go make sure to get a green sheet. It cost an extra dollar but you have to have it for registration purposes. If you have any problems and dont mind the drive bring it to me and ill inspect it.
I have never been charged extra for a green sheet, scam!:bs . I have bought many cars from out of state. All required green sheet and never paid extra.

[StormShadow]

Can we get this done soon? I'm ready to go.:tu:

[L8 APEX]

My preferred installer had to run to San Antonio for a family emergency. I expect him to be back next week.

[99WhiteBeast]

FYI for the tag sticker

Question: What should I do if my license plates are damaged or stolen, or I need to replace a windshield validation sticker? http://www.dot.state.tx.us/imglib/SPACER.GIFAnswer: You can obtain replacement license plates or validation stickers at the county tax assessor-collector’s office (http://www.dot.state.tx.us/vtr/tacoffices/tacoffices.htm). There will be a $5.30 fee.

[L8 APEX]

He swaps the stickers over no probs.

[99WhiteBeast]

He swaps the stickers over no probs.

Is this happening this week? My windshield crack moved another 3 inches today with the weather.

[L8 APEX]

We did the first two today at he shop. Derreck wants to schedule a time with another member sometime as well. I will post the techs phone later so you can coordinate directly with him. He also said he would do gen1's for the same price $150 cash deal.

[BC Lightning]

I got my windshield replaced today, it took all of about 15 min. and the stickers were not damaged :tu: .

[sonicbluetommy]

yeah, what he said

time and date

[L8 APEX]

You guys decide a day and time and I will let him know. How about next Tuesday either lunch time or early morning?

[L8 APEX]

You guys decide a day and time and I will let him know. How about next Tuesday either lunch time or early morning?
I need to let him know a few days in advance guys speak up! How many Tuesday and when??

[sonicbluetommy]

I'm there, anytime is good, just say when!

[99WhiteBeast]

I need to let him know a few days in advance guys speak up! How many Tuesday and when??

Tuesday works for me- early am (7:45-8am) or lunch time

[Showtime]

.

[TP Derrick D]

Tuesday morning

[L8 APEX]

I will schedule 3 for Tuesday around lunch time:tu: . It takes him about 15 minutes a truck. Steve O, Tommy, and Kenny.

[TP Derrick D]

I will schedule 3 for Tuesday around lunch time:tu: . It takes him about 15 minutes a truck. Steve O, Tommy, and Kenny.


Hey Terry, you think he may be able to do 4. I'd like to get in on the next installs if possible.

[L8 APEX]

Hey Terry, you think he may be able to do 4. I'd like to get in on the next installs if possible.
I will ask him tomorrow:tu:

[L8 APEX]

We are set for 11:30-whenever to install all 4 windshields. Show up or I will hunt you down:D .

Tommy
Steve-O
Derreck
Kenny

[TP Derrick D]

We are set for 11:30-whenever to install all 4 windshields. Show up or I will hunt you down:D .

Tommy
Steve-O
Derreck
Kenny



Cool!!!!

[sonicbluetommy]

Well, even though I missed the 11:30-whenever deadline Reilly worked me in over at his shop and did a great job!

He was super careful with my aftermarket wiper cowl which he had to take all of the screws out of and prop up to get the new windshield in. Done in about 30 minutes, good guy!

Thanks for the hookup Terry!

[TP Derrick D]

i just wanted to thank Terry for the hook-up on the windshield. i had it replaced about 2-3 weeks ago by his glass guy. it looks great, he did a excellent job! no water leaks and he didnt get that black windshield sealant all over my truck, in fact not even one little smudge anywhere and it only took him about 15 minutes. Once again thank you Terry!!!!! :tu:


DITTO !!! :tu: :tu: :tu:

[import_fighter]

this sounds like a hell of a deal....150 installed at the shop and 170 if he comes out to my place?i live in carrollton....where the shop located?i have a 97 f150.

[L8 APEX]

I heard he has been hard to reach lately I haven't tried myself. There is a new tint guy that came to the shop last week and he did an EXCELLENT job. I will post his info when I get time.

[BC Lightning]

Riley came to my house and fixed up mine, my dads tahoe, and my buddy daniels windshield last week, great work, and in timely fashion. :tu: to Riley and T for the hook up

[99WhiteBeast]

I will be giving him a call in the morning to replace the break in on the passenger side window. I'll report back on service and availabilty.

[plus376]

silly people! Where do you think PPG gets their windshields?:rll:

[Silver_2000]

silly people! Where do you think PPG gets their windshields?:rll:

PPG is a manufacturer ..

They have one plant in Mexico a couple in Canada and the rest are in US

http://corporateportal.ppg.com/NA/OEMGlass/Information/Facilities/

[plus376]

thats my point ...they are all made as cheap as possible! ( 30 yrs in the biz!)

[plus376]

still a good price though...I usually get $175 here at my shop for those.