TC install

[ThunderBolt]

TC is going in this weekend. Anybody have a list of tools needed for the job?
We're doing the install at MCAlister's place and I don't want to drag my big ass
tool box over there.

Thanks in advance!

[L8 APEX]

I am not sure I understand the post:confused: .

[ThunderBolt]

Basically looking for the required tools to do the job.
I'll probably take a crap load of standard and metric sockets,
extensions, swivels and air tools.

[tliss]

OK...I'll put on the dumbass mask and ask....what the hell is a TC? :confused:

Tom

[ThunderBolt]

:rll: Torque converter.

[ThunderBolt]

I guess that's what Terry was unclear on. Sorry.

[L8 APEX]

I know what a TC is just not sure about the tool list free of charge:D .
I use a transmission extension and 13mm wrench and wobble socket, 15mm socket, long flat blade tine driver, 18mm wrench, 18mm deep socket, 15mm deep socket, 10mm deep socket, 5/8 wrench, 12mm wrench, 14mm wrench and deep socket. Warious extensions 1"-18"
There are 6 converter nuts-14mm
6 bellhousing bolts 13mm, dust cover bolts2-13mm
3 starter bolt and one nut all 13mm
6 crossmember nuts and 2 trans mount nuts all 18mm
two heat shield bolts and one exhaust hanger bolt all 13mm
four catpipe manifold nuts 15mm deep passenger o2 wire is a BITCH.
5/8" wrench for trans cooler lines.
12mm wrench for DS bolts
cut the harness loose from the top of the trans, pry out the locating tit at the top of the bellhousing. Any other tips are extra $$:D

[ThunderBolt]

I appriciate it Terry.:tu:

[Sixpipes]

When you pry out the locating tit please put it in a little box and I'll come by and pick it up. I've always wanted one of them thangs. Oh yeah, and when you pry it out, please be gentle. I'm sure the transmission would really appreciate it. :cool: